Controls
1.A/V Mute: To mute the sound of the projector and to mute the picture.
2.Source: To select the current projection source (Computer, Component, RGBS,
3.
4.Menu: To activate and deactivate the menu.
5.OK: To confirm actions in the menu when the menu is on screen.
6.Standby/Standby indicator: To switch the projector in or out of the Power/Standby mode. The Standby indicator (text on button/ring around button):
•lights up orange when the projector is warming up;
•lights up red when the projector is in Power/Standby mode;
•lights up green as when the projector is operating;
•slowly blinks orange when the projector is cooling down.
7.Temperature indicator:
•Lights up red in case of temperature error.
•Flashes in case of fan error.
8.Lamp indicator:
•Lights up green when the lamp is on.
•Lights up orange when lamp life has almost expired.
•Lights up red when lamp life has expired.
•Fast blinks red when lamp start has failed.
9.IR sensor: To receive the signals from the remote control.
10.Cursor Control: When the menu is active the Cursor Control controls the menu cursor to navigate through the OSD menu. The cursor control works with up/down and left/right button operation.
11.Focus ring: To adjust the focus of the projected image.
12.Zoom ring: To adjust the size of the projected image.