Philips SPD5125, SPD5130, SPD5121 How to safely disconnect without using Safe-Shutdown button?

How to safely disconnect and shut down	EN
using the Safe-Shutdown button?

How to use the Safe-Shutdown button? (Works only via USB connection)

The Nero software, supplied together with this product, has to be installed to enable the Safe-Shutdownfunctionality.

To install Nero BackItUp, insert the Nero installation CD, wait for a pop-up to appear and select Nero from the list of options.

When the pop-up screen doesn’t appear, click on the Setup.exe file from the CD in the Windows Explorer to start the installation.

1Please close Windows Explorer and Nero BackItUp.

2Press the Safe-Shutdownbutton .

3Wait until the blue light on front of the hard disk is not functioning anymore.

4You can now safely disconnect the hard disk from your computer.

How to safely disconnect without using the

Safe-Shutdown button?

1 Double-click the Safely Remove Hardware icon in the task bar in the lower right part of the screen.

2In the window that appears, select the name of the device that is to be removed, then click the Stop button.

3When the Stop a hardware device screen appears, make sure the correct information is displayed, and then click the OK button.

4When the message Safe to remove hardware appears, remove the drive from the computer’s USB port.

5