Philips CPWBS154 manual Connection Policy, Parametre Defaults Description

Page 50

ENGLISH 50

Stateful Packet Inspection allows you to select different application types that are using dynamic port numbers. If you wish to use the Stateful Packet Inspection (SPI) to block packets, click on the Yes radio button in the ‘Enable SPI and Anti-DoS firewall protection’ field and then check the inspection type that you need, such as Packet Fragmentation,TCP Connection, UDP Session, FTP Service, H.323 Service, or TFTP Service.

•When hackers attempt to enter your network, we can alert you by e-mail

If the mail server needs to authenticate your identification before sending out any e-mail, please fill related information in POP3 server, username and password fields. Otherwise leave the three fields blank.

Connection Policy

Enter the appropriate values for TCP/UDP sessions as described in the following table.

 

Parametre

Defaults

Description

 

 

Fragmentation

10 sec

Configures the number of seconds that a packet state structure

 

half-open wait

 

remains active. When timeout value expires, the router drops the

 

 

 

unassembled packet, freeing that structure for use by another packet.

 

TCP SYN wait

30 sec

Defines how long the software will wait for a TCP session to

 

 

 

 

synchronize before dropping the session.

 

 

TCP FIN wait

5 sec

Specifies how long a TCP session will be maintained after the

 

 

 

firewall detects a FIN packet.

 

 

TCP connection

3600 sec

The length of time for which a TCP session will be managed if

 

idle timeout

(1 hour)

there is no activity.

 

 

UDP session idle

30 sec

The length of time for which a UDP session will be managed if

 

timeout

 

there is no activity.

 

 

 

 

 

Page 49 Page 51
Image 50
Page 49 Page 51
Contents CPWBS154 Power button Power InletReset Button Adsl PortTable of Contents Introduction About the Adsl Wireless Base StationFeatures and Benefits ApplicationsVirtual Server Important informationShared IP Address DMZ Host SupportEnvironmental information Safety PrecautionsPackaging contents DisclaimerHardware Description InstallationSystem Requirements Connect the System LED IndicatorsISP Settings LEDInstalling a Splitterless Connection Phone Line ConfigurationInstalling a Full-Rate Connection Attach to Your Network Using Ethernet Cabling Connect the Power AdapterWindows 98/Me Configuring Client PCTCP/IP Configuration Depending on your operating systemEnglish Internet Explorer TCP/IP Configuration SettingDisable Http Proxy Open Internet Explorer Click the StopObtain IP Settings from Your Adsl Wireless Base Station Windows NT English TCP/IP Configuration Setting English Windows Disable Http Proxy Windows XP Configuring Your Macintosh Computer Internet Explorer Uncheck all check boxes and click OK Quickstart Service Provider Login Configuring the Adsl Wireless Base StationSetup Wizard Wireless Network SettingsConfirm page shows a summary of the configuration parameters ConfirmOperation Mode Automatic T1.413 issue 992.1 992.2 Parameter DescriptionStatus Used to supplement FEC Following items are included on the Adsl statusFast Path FEC Correction Remaining frames are also used for special functionsAdvanced Setup Time Settings Password SettingsRemote Management DNSATM PVC WANClone MAC With less overheadClone MAC Address Home NetworkingLease Time WirelessCheck Enable and click ‘SAVE SETTINGS’ Channel, the domain identifier, and the security optionsChannel Station and all of its wireless clientsChannel and Ssid Or you may select one manuallyWEP Pre-shared key for the Soho network environment without an WPA802.1X for the enterprise network with a Radius server 802.1XNAT During inactivity Re-AuthenticationDefines the request identifier of the Network Access Server Address Mapping List of ports is maintained at the following linkSpecial Applications NAT Mapping TableRIP RouteStatic Route Globally enables or disables RIP Metric Update and enters the network in the routing tableRouting Table Parameter Description FirewallAccess Control MAC Filter URL Blocking Schedule RuleIntrusion Detection Feature Intrusion DetectionScroll down to view more information Stateful Packet InspectionParametre Defaults Description Connection PolicyDoS Criteria and Port Scan Criteria Community Valid Enables/disables the entryDMZ Macintosh Finding the MAC address of a Network CardWindows NT4/2000/XP LinuxFirmware Upgrade MaintenanceConfiguration Tools ResetStatus Following items are included on the Status Connect to your ISPFor Windows XP and Windows How to set-up a computer network?What is Your Windows VERSION? English Wizard Network Setup appears. Click ‘Next’ to continue Wizard Network SettingsEnglish English English For Windows 98SE and Windows Me English English English Troubleshooting Problem SolutionWireless PC Specifications Physical CharacteristicsModulation Type RF Output Power Modulation Rate-Output Power dBmModulation Rate-Output Power dBm Operating Channels Ieee 802.11b compliantEnvironmental CPWBS154 October

CPWBS154 specifications

The Philips CPWBS154 is a cutting-edge toothbrush designed to elevate oral hygiene through advanced technology and user-friendly features. At its core, the CPWBS154 is equipped with Sonicare technology, which offers powerful yet gentle cleaning. This technology generates up to 62,000 brush strokes per minute, effectively removing plaque and enhancing overall gum health.

One of the main features of the CPWBS154 is its smart sensor technology. This intelligent system provides real-time feedback, ensuring that users apply the right amount of pressure while brushing. If excessive pressure is detected, the toothbrush vibrates gently to alert the user, promoting a more effective and safer brushing technique. This feature is particularly beneficial for those who tend to brush too hard, as it helps prevent gum recession and enamel wear.

The Philips CPWBS154 also boasts multiple cleaning modes tailored to individual needs. With settings for daily clean, gum care, and sensitive, users can customize their brushing experience based on specific oral health requirements. The toothbrush's smart timer encourages the recommended two minutes of brushing, with an interval timer that prompts users to move to different quadrants of their mouth, ensuring a comprehensive clean.

Another remarkable characteristic of the CPWBS154 is its long battery life. The rechargeable lithium-ion battery can last up to two weeks on a single charge, making it an excellent travel companion. Additionally, the toothbrush is designed with a sleek and ergonomic handle, providing comfort during use.

The Philips CPWBS154 incorporates a unique BrushSync technology that tracks brush head usage and lets users know when it’s time for a replacement. The brush head is designed to deliver optimal cleaning performance over time, and the system ensures that users always have a fresh and effective tool at their disposal.

In summary, the Philips CPWBS154 combines advanced sonic cleaning technology, smart sensors, customizable modes, long battery life, and innovative BrushSync features. This toothbrush not only promotes superior oral hygiene but also adds convenience and user engagement to everyday brushing routines, making it a top choice for those seeking to enhance their dental care. With its thoughtfully designed characteristics, the CPWBS154 stands as a testament to Philips' commitment to innovative and effective oral health solutions.
Top Page Image Contents