Philips CPWBS154 manual Installation, System Requirements, Hardware Description

Page 7

ENGLISH 7

Installation

System Requirements

•ADSL line installed by your Internet Service Provider.

•A computer using a fixed IP address or dynamic IP address assigned via DHCP, as well as a gateway server address and DNS server address from your service provider.

•A computer equipped with a 10/100 Mbps network adapter, a USB-to- Ethernet converter or an IEEE 802.11g wireless network adapter.

•TCP/IP network protocols installed on each PC that will access the Internet.

•A Java-enabled web browser, such as Microsoft Internet Explorer 5.5 or above or Netscape 4.7 or above, installed on one PC at your site for configuring the ADSL Wireless Base Station.

Hardware Description

The ADSL Wireless Base Station contains an integrated ADSL modem and connects to the Internet or to a remote site using its RJ-11 WAN port. It can be connected directly to your PC or to a local area network using any of the four 10/100 Ethernet LAN ports.

Data passing between devices connected to your local area network can run at up to 100 Mbps over the 10/100 Ethernet ports and 54 Mbps over the built-in wireless network adapter.

The ADSL Wireless Base Station includes an LED display on the front panel for system power and port indications that simplifies installation and network troubleshooting. It also provides the following ports on the rear panel:

ADSL

POWER RESET

LAN1

LAN2

LAN3

LAN4

1 2 34 5

1ADSL Port

WAN port (RJ-11). Connect your ADSL line to this port.

2Power Inlet

Connect the included power adapter to this inlet.

Warning: Using the wrong type of power adapter may damage the ADSL Wireless Base Station.

3Reset Button

Use this button to reset the power and restore the default factory settings.To reset without losing configuration settings, see ‘Reset’ on page 54-55.

4Power button

Press this button to turn on/turn off the ADSL Wireless Base Station.

5LAN Ports

10/100 Ethernet ports (RJ-45). Connect devices on your local area network to these ports (i.e., a PC, hub, or switch).

Page 6 Page 8
Image 7
Page 6 Page 8
Contents CPWBS154 Adsl Port Power InletReset Button Power buttonTable of Contents Applications About the Adsl Wireless Base StationFeatures and Benefits IntroductionDMZ Host Support Important informationShared IP Address Virtual ServerDisclaimer Safety PrecautionsPackaging contents Environmental informationSystem Requirements InstallationHardware Description LED LED IndicatorsISP Settings Connect the SystemInstalling a Full-Rate Connection Phone Line ConfigurationInstalling a Splitterless Connection Connect the Power Adapter Attach to Your Network Using Ethernet CablingDepending on your operating system Configuring Client PCTCP/IP Configuration Windows 98/MeEnglish Open Internet Explorer Click the Stop TCP/IP Configuration SettingDisable Http Proxy Internet ExplorerObtain IP Settings from Your Adsl Wireless Base Station Windows NT English TCP/IP Configuration Setting English Windows Disable Http Proxy Windows XP Configuring Your Macintosh Computer Internet Explorer Uncheck all check boxes and click OK Wireless Network Settings Configuring the Adsl Wireless Base StationSetup Wizard Quickstart Service Provider LoginConfirm Confirm page shows a summary of the configuration parametersParameter Description Operation Mode Automatic T1.413 issue 992.1 992.2Status Remaining frames are also used for special functions Following items are included on the Adsl statusFast Path FEC Correction Used to supplement FECAdvanced Setup Password Settings Time SettingsDNS Remote ManagementWith less overhead WANClone MAC ATM PVCHome Networking Clone MAC AddressChannel, the domain identifier, and the security options WirelessCheck Enable and click ‘SAVE SETTINGS’ Lease TimeOr you may select one manually Station and all of its wireless clientsChannel and Ssid ChannelWEP 802.1X WPA802.1X for the enterprise network with a Radius server Pre-shared key for the Soho network environment without anDefines the request identifier of the Network Access Server During inactivity Re-AuthenticationNAT List of ports is maintained at the following link Address MappingNAT Mapping Table Special ApplicationsStatic Route RouteRIP Globally enables or disables RIP Firewall Update and enters the network in the routing tableRouting Table Parameter Description MetricAccess Control MAC Filter Schedule Rule URL BlockingIntrusion Detection Intrusion Detection FeatureStateful Packet Inspection Scroll down to view more informationConnection Policy Parametre Defaults DescriptionDoS Criteria and Port Scan Criteria DMZ Valid Enables/disables the entryCommunity Linux Finding the MAC address of a Network CardWindows NT4/2000/XP MacintoshReset MaintenanceConfiguration Tools Firmware UpgradeStatus Connect to your ISP Following items are included on the StatusWhat is Your Windows VERSION? How to set-up a computer network?For Windows XP and Windows English Wizard Network Settings Wizard Network Setup appears. Click ‘Next’ to continueEnglish English English For Windows 98SE and Windows Me English English English Problem Solution TroubleshootingWireless PC Physical Characteristics SpecificationsOperating Channels Ieee 802.11b compliant RF Output Power Modulation Rate-Output Power dBmModulation Rate-Output Power dBm Modulation TypeEnvironmental October CPWBS154

CPWBS154 specifications

The Philips CPWBS154 is a cutting-edge toothbrush designed to elevate oral hygiene through advanced technology and user-friendly features. At its core, the CPWBS154 is equipped with Sonicare technology, which offers powerful yet gentle cleaning. This technology generates up to 62,000 brush strokes per minute, effectively removing plaque and enhancing overall gum health.

One of the main features of the CPWBS154 is its smart sensor technology. This intelligent system provides real-time feedback, ensuring that users apply the right amount of pressure while brushing. If excessive pressure is detected, the toothbrush vibrates gently to alert the user, promoting a more effective and safer brushing technique. This feature is particularly beneficial for those who tend to brush too hard, as it helps prevent gum recession and enamel wear.

The Philips CPWBS154 also boasts multiple cleaning modes tailored to individual needs. With settings for daily clean, gum care, and sensitive, users can customize their brushing experience based on specific oral health requirements. The toothbrush's smart timer encourages the recommended two minutes of brushing, with an interval timer that prompts users to move to different quadrants of their mouth, ensuring a comprehensive clean.

Another remarkable characteristic of the CPWBS154 is its long battery life. The rechargeable lithium-ion battery can last up to two weeks on a single charge, making it an excellent travel companion. Additionally, the toothbrush is designed with a sleek and ergonomic handle, providing comfort during use.

The Philips CPWBS154 incorporates a unique BrushSync technology that tracks brush head usage and lets users know when it’s time for a replacement. The brush head is designed to deliver optimal cleaning performance over time, and the system ensures that users always have a fresh and effective tool at their disposal.

In summary, the Philips CPWBS154 combines advanced sonic cleaning technology, smart sensors, customizable modes, long battery life, and innovative BrushSync features. This toothbrush not only promotes superior oral hygiene but also adds convenience and user engagement to everyday brushing routines, making it a top choice for those seeking to enhance their dental care. With its thoughtfully designed characteristics, the CPWBS154 stands as a testament to Philips' commitment to innovative and effective oral health solutions.
Top Page Image Contents