Philips CGA7740N manual Frequently asked questions

Page 23

6 Frequently asked questions

In this chapter you will find the most frequently asked questions and answers about your Wireless ADSL Modem Router.

Set-up

I cannot connect using the Web browser

•Check that you have a valid network connection to your ADSL Wireless Base Station

•Check all parameter settings with your Internet provider

•Check and signals

I forgot (or lost) the password. How do I reset my ADSL Wireless Base Station (Factory Defaults) ?

•Make sure the ADSL Wireless Base Station is turned ON

•Use a pen to push the recessed reset button on the rear panel, holding it down for at least five seconds

•Release the reset button and the ADSL Wireless Base Station restarts

!Warning

When you reset the ADSL Wireless Base Station using the reset button, all configuration settings will be lost, also your ISP setting (Internet Service Provider).

A Wireless PC cannot associate with my ADSL Wireless Base Station

•Make sure that the WiFi function of your ADSL Wireless Base Station is enabled

•Make sure the Wireless PC has the same SSID setting as your ADSL Wireless Base Station. See webpage “Channel and SSID”.

•You need to have the same security settings on the Wireless PC and your ADSL Wireless Base Station. See “Security webpages”.

Product behaviour

The signal does not switch on

•Make sure that the electrical power supply is plugged into a wall outlet

•Make sure that the coaxial jack of the electrical power supply adapter is plugged into your ADSL Wireless Base Station

•Make sure you are using the correct power supply for your Wireless Modem Router

•Make sure that the power switch of your ADSL Wireless Base Station is ON

•However, if your ADSL Wireless Base Station power if OFF after running for a while, check for power loss or overcharge. (If your wall outlet has a switch is it in position ON ?)

•If you still cannot isolate the problem, then the external power supply may be defective. In this case, contact Technical Support for assistance

The signal is OFF

•Make sure that the telephone cable (RJ11) is plugged into the ADSL port of your ADSL Wireless Base Station and to your telephone wall outlet or distributed filter.

•Make sure that your landline works correctly. You can connect another telephone in the place of your current product. If you do not have tonality, the problem comes from your telephone line.

The signal is always OFF

•Confirm with your Internet Service Provider that your Internet service is active

•Confirm your Internet setting with your Internet Service Provider

The signals do not switch ON. Cannot ping the ADSL Wireless Base Station from the attached LAN.

•If you are using the Ethernet connection, verify that your TCP/IP is properly installed and configured on your PC.

•Make sure the Ethernet cable (RJ45) is firmly connected to your ADSL Wireless Base Station.

•Make sure you are using the correct cable type for your Ethernet equipment

•Verify that the IP address is properly configured. For most applications, you should use the ADSL Wireless Base Station DHCP function to dynamically assign IP address to hosts on the attached LAN. However, if you manually configure IP address on the LAN, verify that the same network address and subnet mask are used for both the ADSL Wireless Base Station and any attached LAN devices.

The Wireless network is often interrupted

•Move your Wireless PC closer to the ADSL Wireless Base Station to find a better signal. If the signal is still weak, you can change the angle of the antenna. There may be interference, possibly caused by microwave ovens, a Wireless TV link or wireless phones. Adapt the location of the interference sources or of the ADSL Wireless Base Station.

•You can change the wireless channels on the ADSL Wireless Base Station. See webpage “Channel and SSID”.

The Wireless Router is hot

•This is a normal behaviour

•Make sure to never cover the cooling slots

Frequently asked questions

21

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Register your product and get support at CGA7740N Page Table of contents Use one of the following disposal options Safety informationNetwork range & speed information ConformityWhat else will you need Your Wireless Adsl Modem RouterWhat’s in the box Adsl port Reset buttonPower Inlet ButtonTip InstallGetting started ConnectInstall another WPS device Install a WiFi deviceInstall a Wireless USB adapter CCU7740N Install another WiFi deviceVia the PBC method Via the Manual configurationConfiguring the Wireless Modem Router Security webpages Firewall ISP settings 4 DNSParameters Schedule Rule Access Control URL BlockingMAC filter Intrusion Detection Wireless Security3 WPS Wireless EncryptionAccess Control 802.1xManual Home Network Settings webpages StatusNetwork settings WirelessVirtual Server Advanced settings webpagesChannel and Ssid 1 NATNAT Mapping Table Firmware Upgrade Reset MaintenanceConfiguration Tools Special ApplicationsSnmp community Remote Management System Time SettingsPassword Settings SnmpQoS Upnp Upnp Universal Plug and Play settingsDdns Ddns Dynamic DNS settings Snmp TrapRIP parameters Static route SET UP WiZARD Getting startedWireless settings RoutingConfirm Adsl settingsAdsl Features Technical dataFrequently asked questions Page

CGA7740N specifications

The Philips CGA7740N is a highly advanced audio device designed to elevate the listening experience in both casual and professional environments. With a sleek design and a range of innovative features, this product stands out in the crowded audio market.

One of the main features of the CGA7740N is its impressive sound quality. The device incorporates high-fidelity audio technology, delivering crystal-clear sound with deep bass and crisp treble. This ensures that music, movies, and games are experienced as intended, with every note and nuance captured flawlessly.

The CGA7740N also utilizes advanced connectivity options, making it a versatile addition to any home audio setup. It is equipped with Bluetooth technology, allowing for seamless wireless streaming from smartphones, tablets, and other compatible devices. Additionally, it includes multiple input options such as HDMI, USB, and optical audio, enabling easy connections to various multimedia systems and peripherals.

An excellent characteristic of this model is its user-friendly interface. With intuitive controls and a well-structured layout, users can easily navigate through various settings, adjust sound profiles, and access their favorite playlists. The device also features a remote control for added convenience, making it easy to manage audio playback from a distance.

Moreover, the CGA7740N includes innovative sound processing technologies, such as Dolby Atmos and DTS:X, which provide an immersive audio experience. These technologies enhance the spatial quality of sounds, allowing users to feel as though they are part of the action, whether they are watching a film or listening to music.

The design of the CGA7740N is equally impressive, with a modern aesthetic that fits seamlessly into any décor. The build quality reflects a commitment to durability, ensuring that the device stands up to regular use over time.

In summary, the Philips CGA7740N brings together high-quality audio performance, versatile connectivity options, user-friendly controls, and modern design elements. It is an excellent choice for anyone seeking to enhance their audio experience, whether at home or in a professional setting. With its advanced features and reliable performance, the CGA7740N continues to be a standout product in the audio market.
Top Page Image Contents