8Connect the other end of the supplied line cord to the ADSL filter then connect the ADSL filter to the telephone socket
• 
light will turn on
9Then click on Continue
• A progress bar screen will be displayed
10Select your country and Internet Service Provider (ISP) using the information provided by your ISP
Note
If your ISP is not in the default list, please select "Other".
11Click on Continue
•A progress bar screen will be displayed, your parameters will be saved and you will be connected to Internet
•Once the installation completed, the following screen will be displayed
Note
This screen is the Philips support site. It is a live Internet page, subject to change. The screen displayed may differ from the one shown.
12Click on Menu if you want to go back to the menu screen
Tip
Your WiFi network is running but not secured.
13Click on Set Encryption
•Your WiFi network will be secured automatically
•You will not be able to choose your encryption key nor your network name (SSID)
Note
At any time you can retrieve your wireless security settings using your installation CD ROM on the computer where you installed your
gateway and by clicking on the security icon 
of the menu page.
3.3 Install a WiFi device
If you want to install a WiFi device you have to retrieve your wireless security settings using your installation CD ROM on the computer where you installed your gateway and by clicking on the security icon 
of the menu page.
3.3.1 Install a Wireless USB adapter CCU7740N
If you have bought the starter kit CKA7740N, the Wireless USB adapter CCU7740N is part of the box content. In that case you just have to insert the installation CD ROM, provided with your CKA7740N, and follow the instructions on the screen.
3.3.2 Install another WiFi device
1Refer to the manual of the other WiFi device
Note
If you have previously secured your network (see 3.2 step 13) through the easy installation, the name of your network (SSID) will be "PHILIPS_xxxxxx".
If not secured previously through the easy installation, the SSID will be "philips_install".
In case you have given another name to your network, bear in mind that this name will be displayed instead of the "PHILIPS_xxxxxx" or
"philips_install".
Note
At any time you can retrieve your wireless security settings using your
installation CD ROM on the computer where you installed your
gateway and by clicking on the security icon 
of the menu page.
3.4 Install another WPS device
You can install another WPS device on your network in any of the three following ways :
3.4.1 via the PIN method
1Check that your Wireless router and that the other WPS device are connected and ON
2On your Internet Browser, enter http://192.168.2.1 in the address field and click on GO to access the webpages
3Click on the WIRELESS tab on the left side of the page and select PIN to open the corresponding subpage
4Enter the PIN from the client device (the other WPS device) and click START PIN
• The other WPS device is installed on your network
6 | Getting started |