Philips ADAT-4 manual This Section, Before You Begin, Opening The Module, Closing The Module

Page 17

Inside the Module

In This Section

This section provides instructions for opening and closing the SoundPals SDDM-8 module to gain access to the internal circuit board.

NOTE The internal circuit board should only be removed from the module if you want to change the jumpers.

Before You Begin

Check the following items before opening the module and attempting to remove the internal circuit board:

￿If required, remove the SoundPals module from the rack tray.

￿Disconnect the power supply from the front of the product.

￿Disconnect all input, output and control cables.

￿Perform the remaining steps only in a static free environment. Make sure that you and the product are both grounded.

The following tools are required:

•#2 Phillips screwdriver

•9/16 box wrench (or end wrench)

Opening The Module

Use the following steps to open a SoundPals module:

1.On the rear panel, remove the four Phillips screws from the four corners of the SoundPals module.

2.On the front panel, remove all Philips XLR mounting screws from the SoundPals module.

3.On the front panel, remove the BNC nut and associated lock washer.

4.Pulling the rear panel, carefully draw the internal circuit board and rear panel assembly from the housing.

CAUTION Keep the case horizontal so that the BNC bushing stays with the connector. 5. Set the housing and all mounting hardware in a safe place.

Closing The Module

Use the following steps to close a SoundPals module:

1.Ensure that the product label is on the bottom.

2.Carefully slide the internal circuit board and rear panel assembly through the housing. Keep the case horizontal so that the BNC bushing stays with the connector.

3.Replace the BNC nut and associated lock washer on the front panel of the module.

4.Replace all Phillips XLR mounting screws on the front panel of the module.

5.Replace and tighten the four Phillips screws on the rear corners of the module.

CAUTION Do not over tighten the screws.

ADAT-4 User Guide

Page 11

Page 16 Page 18
Image 17
Page 16 Page 18
Contents ADAT-4 User Guide Page Printing History FCC Compliance Warranty StatementCopyrights and Trademarks Company AddressPage Table of Contents Page What are SoundPals? Signals and ValuesDocumentation Conventions Primary SectionUnpacking and Inspection Power Supply NoteAbout the ADAT-4 ADAT-4ADAT-4 Installation Connecting PowerADAT-to-AES Conversion ADAT-4 OperationADAT-4 Interconnection Adat Bridge to AES Routing System J5 is the Word Clock Input Polarity jumper ADAT-4 Internal JumpersFunction ADAT-4 Specifications ADAT-4 TroubleshootingProblem Procedure Parameter SpecificationAdat Input Track AES Output Audio SpecificationsBefore You Begin This SectionOpening The Module Closing The ModulePortable Power Sources About Power SuppliesPower Supply Specifications Power Supply Sources

ADAT-4 specifications

The Philips ADAT-4, a groundbreaking digital audio tape recorder, represents a significant advancement in recording technology. Launched by the Dutch electronics giant Philips, this innovative device is well-regarded for its precision and versatility, making it a staple in both professional studios and personal music setups.

At the heart of the ADAT-4 is its ability to record eight tracks of audio simultaneously. This multi-tracking capability allows musicians and sound engineers to layer multiple audio sources, such as vocals, guitars, and drums, creating rich and complex soundscapes. The machine operates using a unique digital audio tape (DAT) format, which ensures high fidelity and clarity in sound reproduction.

One of the standout features of the ADAT-4 is its user-friendly interface. The front panel is equipped with a series of intuitive controls, enabling users to navigate between various functions seamlessly. The LCD screen displays real-time information about recording levels, track status, and remaining tape time, allowing for efficient monitoring during sessions. This design philosophy reflects Philips’ commitment to making professional recording accessible to all.

In terms of connectivity, the ADAT-4 is versatile, featuring multiple input and output options, including S/PDIF and optical connections. This capability allows it to integrate smoothly with other digital equipment, such as mixing consoles and synthesizers, enhancing its utility in a studio setting. Additionally, the ADAT format was designed to support a wide range of audio processing technologies, making the ADAT-4 compatible with various audio formats and systems.

The sophisticated error correction technology in the ADAT-4 further enhances its reliability. It utilizes advanced algorithms to detect and repair any audio data discrepancies, ensuring that recordings are as pristine as possible, even in challenging conditions. This feature is particularly critical in professional settings where audio integrity is paramount.

The build quality of the ADAT-4 is another noteworthy aspect, showcasing Philips' dedication to durability. Constructed with high-quality materials, the device is built to withstand the rigors of frequent use, making it a worthwhile investment for both amateur and professional audio engineers.

In conclusion, the Philips ADAT-4 is a remarkable digital audio tape recorder that combines advanced technology with user-centric design. Its eight-track recording capability, intuitive interface, versatile connectivity options, robust error correction, and durable construction make it an essential tool for anyone serious about audio production. Whether in a professional studio or for personal use, the ADAT-4 continues to be a beloved choice among audio enthusiasts.
Top Page Image Contents