Philips PI3100 manual Connections, Connect to the Internet, Connect to your PC

5 Connections

Connect to the Internet

Connect PI3100 to a wireless router (Access Point).You can connect PI3100 to the network that is built around the router.

To connect to the Internet, make sure that the router connects to the Internet directly and no dial-up is required on the computer.

A Tap to select a network.

BOn the pop-up screen, enter the password to the network.

»» is displayed in the status bar when the Wi-Fi connection is completed successfully.

»»Next time you switch on PI3100, PI3100 connects to the previously connected network automatically.

Note

•• If MAC address filtering is enabled on your router, add the MAC address of PI3100 to the list of devices that are allowed to join the network.To find the Wi-Fi MAC address, go to Settings > About tablet > Status on the Home screen.

•• To refresh the list of networks, select > Scan at the upper-right corner of the screen.

•• If you have disabled SSID broadcasting or hidden the Service Set Identifier (SSID) of the router, manually enter the SSID or public name for the network. Go to

Settings > Wi-Fi. On the top bar, select .

•• If the DHCP (Dynamic Host Configuration Protocol) is unavailable or disabled on the router, manually enter the IP address of PI3100.

1 From the Home screen, tap Settings >

Wi-Fi.

2 Select the option to switch on the Wi-Fi function.

»»You see a list of Wi-Fi networks in range.

3 Connect PI3100 to a network:

Connect to your PC

Connect PI3100 to a PC through the USB cable.

You can transfer apps or media files from your PC to PI3100,the internal storage or SD card.

EN 13