Philips PI3100 Get started, Charge power, Switch the device on or off, Conserve battery power

3 Get started

Charge power

PI3100 has a built-in battery that can be charged through the USB connector of the supplied USB power adapter.

The first time you use PI3100, charge PI3100 for more than eight hours.

•By using the USB cable, connect PI3100 to the supplied USB power adapter.

Note

•• Rechargeable batteries have a limited number of charge cycles. Battery life and number of charge cycles vary by use and settings.

Conserve battery power

•To conserve battery power and increase the play time, do the following:

Use the sleep mode

After the selected time duration, PI3100 goes to the sleep mode, and the screen switches off automatically.To save battery power, do the following:

•Go to > Display > Sleep to set the screen-off timer to a low value.

•To switch off Wi-Fi during the sleep mode,

AGo to > Wi-Fi.

BAt the top bar, select > Advanced > Keep Wi-Fi on during sleep. Select Never.

Switch the device on or off

Press and hold the power/ lock button until the device is switched on or off.

EN 7