Philips AV-HS300G manual Transition area

1. Functions in each area

1-4. Transition area

[BKGD] switch

This executes the background transition when the [AUTO] switch () or fader lever () has been operated.

When the [BKGD] switch is pressed and it is selected, its indicator is lighted in amber. If the [KEY] switch () is now pressed, the indicator goes off, and the de‑selected status is established.

When the [BKGD] switch and [KEY] switch () are pressed at the same time, both switches are set to the selected status.

The selection status cannot be changed while a transition is being executed or suspended.

[KEY] switch

This executes the key transition (MIX) when the [AUTO] switch () or fader lever () has been operated. When the [KEY] switch is pressed and it is selected, its indicator lights in amber.

If the [BKGD] switch () is now pressed, the indicator goes off, and the de-selected status is established. When the [BKGD] switch () and [KEY] switch are pressed at the same time, both switches are set to the selected status.

The selection status cannot be changed while a transition is being executed or suspended.

KEY ON tally LED

This lights in red when the key ON status is established.

[MIX] switch

This is used to switch the A and B bus images while making them overlap. During the transition, the A and B bus output total is kept at 100 %.

When the [MIX] switch is pressed and it is selected, its indicator lights in amber.

If the [WIPE] switch () is now pressed, it goes off, and the de-selected status is established.

[WIPE] switch

This is used to execute the transition using the pattern selected by the wipe pattern selector switch (). When the [WIPE] switch is pressed and it is selected, its indicator lights in amber.

If the [MIX] switch () is now pressed, it goes off, and the de-selected status is established.

[AUTO] switch

This is used to automatically execute transitions (auto transition) using the transition time which has been set. During auto transition its indicator lights in red. When the switch is pressed again during auto transition, the auto transition operation is suspended, and the indicator lights in green. When it is pressed again while auto transition is suspended, the remaining transition is executed.

The indicator goes off when auto transition is completed.

When the [AUTO] switch is pressed while the fader lever () is at an interim position, the remaining transition is executed using the transition time which has been set.

11