Philips AV-HS300G manual Preset memory, 4503, ‰
$-3, Transition area, User color

2. Basic operations

2-7. Preset memory

Up to 10 panel settings can be stored in this memory.

The table below lists the settings which are stored.

<Table of stored preset memory>

Item	Description of setting	Initial value (factory default)
Crosspoint	A bus	1
	B bus	1
	KEY-S	1
	KEY-F	1
	AUX bus	1
	Color background	WHITE
Wipe	Wipe pattern	4 (center)
	Border width	0
	Soft effect width	0
	Border color	WHT
Transition area	BKGD/KEY selection	BKGD
	MIX/WIPE selection	MIX
	Auto transition time (BKGD)	30F
	Auto transition time (KEY)	30F
Key	Key type (TYPE)	LIN
	Key adjustment (ADJ)	GAIN: 100
		CLIP: 0
		DENS: 100
	Invert ON/OFF	OFF
	Fill color	BLE
	Edge color	YLW
	Edge ON/OFF (TYPE)	OFF
	Edge width	2
User color	User color 1 (HUE, SAT, LUM)	0, 0, 100
	User color 2 (HUE, SAT, LUM)	355, 100, 7
	User color 3 (HUE, SAT, LUM)	50, 100, 29
	User color 4 (HUE, SAT, LUM)	0, 0, 0

The data stored in the preset memory will not be initialized even when initializing is performed.

STORE: This is used to store the panel settings in the preset memory.

1Press the [FUNC] switch to light its indicator, and then press the [MEM] switch to display the MEM menu. The PSMEM (1/3) menu appears first.

2Turn [F2], select “STOR” using the MODE item, turn [F3], and set the preset memory number using the NO. item.

3Press the [F4] switch (EXEC) to store the settings.

14.&.	.0%&		/0
	4503				&9&$
	3&$-		‰
		$-3

An asterisk () appears at the left of the number when data has been saved in the preset memory.

26