SOUND – USING THE AUDIO/VIDEO INPUT JACKS (CONT’D)
S-VIDEO INPUT
The S(uper)-Video connection on the rear of the TV can pro-
vide you with better picture detail and clarity for the playback of accessory sources such as DBS (digital broadcast satellite), DVD (digital video discs), video games, and S-VHS VCR (video cassette recorder) tapes than the normal antenna picture connections.
NOTE: The accessory device must have an S-VIDEO OUT(put) jack in order for you to complete the connection on this page.
Connect the S-VIDEO CABLE to the S-VIDEO input jack on the rear of the television. Then connect the AUDIO (red and white) cables to the AUDIO AV2 jacks on the rear of the TV.
Connect the S-VIDEO CABLE to the S-VIDEO output jack on the accessory device. Then connect the red and white AUDIO cables to the AUDIO (left and right) output jacks on the rear of the accessory device.
Turn the accessory device ON.
Press the SOURCE button on
the remote control to tune the AV2 channel. You are now ready to view the tape or disc on the TV.
SMART HELP
The S-VIDEO and VIDEO AV2 in(puts) are in
parallel. The S-VIDEO input is dominant when in use. If separate video signals are connected to the S-VIDEO and VIDEO AV2 in(puts), the signal from the VIDEO AV2 in(put) will not be usable.
If you have added AV2 in(puts) to the TVÕs channel memory, just press the CHANNEL (+) or (Ð) button until the AV2 in(puts) (channel) mode is selected.
NOTE: Repeatedly pressing the SOURCE button on the remote will toggle the picture source from the current channel, the last viewed channel, then the AV1 (or CVI) con- nection, the AV2 connection, and the AV3 connection.
24
AV3
AV2
AV1
| | PIP | |
TV/VCR | ON/OFF | POSITION | FREEZE |
A/CH | | | |
INCR. SURR. | SURF | SWAP | SOURCE |
| SOUND | | | PICTURE |
| MENU | | | M-LINK |
4 | VOL | MUTE | | CH |
| | | |
| SOURCE STATUS/EXIT | CC | CLOCK |
| ITR/REC | HOME | HOME | PERSONAL |
| | VIDEO | MOVIES |
| PROGRAM LIST | | | OPEN/CLOSE |
| OK | | | |
| BACK OF TV | |
8 | | | 8 |
| | | M-Link |
+ | R – | – L | + |
| SURROUND SOUND | |
VIDEO
ANT 75‰
Y
L
PbS-VIDEO
AUDIO
R
Pr
AUDIO IN
(RED/WHITE)
S-VIDEO CABLE (NOT SUPPLIED)
2
L | R | VIDEO | S-VIDEO | ANT/CABLE |
AUDIO OUT | OUT | OUT | OUT |
| | | | |
BACK OF ACCESSORY
3
DBS, DVD, Video Game, etc.
(EQUIPPED WITH S-VIDEO AND
AUDIO OUTPUT JACKS)
NOTE: If you are using a nonstereo device, use only the Audio R jack.
For fast help, call us first
Warranty Verification
Important Safety Instructions
Table of Contents
Standard Broadcast VHF/UHF or Cable TV Catv channel capabil
Features
Adjusting the Picture
Turning on the Imagemax Control
Turning on the Dynamic Noise Reduction Control
Press the STATUS/EXIT button
Press the Cursor Right button and the menu will shift to
Using the Closed Captioning Control
Press the STATUS/EXIT but- ton to remove the menu from
Press the Cursor Down
Selecting the Screen Format Size
Press the Cursor Right
Press the STATUS/EXIT but
Press the Menu button on
Activating the Blue Mute Control
Press the Cursor Right
Press the STATUS/EXIT but
Sleep OFF
Using the Sleep Timer
Press the Cursor UP or CUR- SOR Down button to select
Timer Setting the Clock
Press the Cursor Right but
Timer Setting the Start Time
Timer Setting the Stop Time
Press the Numbered but
Timer Selecting the Channel
Channel. Or, press the Cursor
Once press the Cursor
Timer Setting Activate to on or OFF
Then press the Cursor Down
Timer Turning on the Timer Display
Or Cursor Left button to turn
You also can block individual channels or block programming
Understanding Autolock
Code
Autolock Setting UP the Access Code
Left. Then press the Cursor
Autolock Blocking Channels
Auto Lock Blocking by Movie Rating
Enter your four-digit Access CODE. Correct will
Button again to highlight
Cursor Down button to high
Autolock Blocking by TV Rating
Autolock Turning Block on or OFF
Access Code and the menu
Enter your four-digit
Press the Cursor Right or
Autolock Blocking Unrated Broadcasts
Enter your four-digit Access Code and the menu
Or Cursor Left button to
Autolock Blocking Broadcasts That have no Rating
Enter your four-digit Access
Or Cursor Left button to tog
Block Unrated No Rating
Autolock Reviewing Your Settings
Auto Lock Viewing Blocked Programming
Cursor Left button to adjust
Sound Adjusting the Treble , Bass , and Balance
Use the Cursor Right or
Control, press the Cursor
Volume
Sound Adjusting the Volume
SOR Right or Cursor Left
Sound Using the AVL Audio Volume Leveler
Press the INCR. SURR. but
Sound Using Incredible Surround
Treble
Sound Setting the TV for Stereo and SAP
Audio OUT
Sound Setting the Audio OUT Control
Treble
Sound Using the TV Speaker Control and Audio Output Jacks
Sound Using the Surround Sound External Speaker Connections
Press the Source button
Sound Using the AUDIO/VIDEO Input Jacks
Super-Video connection on the rear of the TV can pro
Sound Using the AUDIO/VIDEO Input Jacks CONT’D
Device to the Y, Pb, Pr input jacks on the TV
Press the Picture button
Remote Control Using Autopicture
Press the Picture button repeatedly to select either PER
Press the Sound button on
Remote Control Using Autosound
Press the Sound button
Press the CHANNEL+ or Ð
Remote Control Using Channel Surf
Press the Surf button on
Screen, press the Cursor
PIP Basic Connections
First, use an optional signal
Connect the Video OUT jack
AV1, AV2, AV3, S-VIDEO Ð for
PIP Selecting the Signal Source
PIP Remote Control Buttons
Cursor Left button to
PIP Adjusting the Color and Tint
Press the Cursor Right or Cursor Left button to
Cable Box and VCR Connections
PIP More Connections
PIP More Connections Cont ’D
Troubleshooting
No Power No Picture No Sound
Glossary of Television Terms
Index
Canada
Factory Service Locations
Limited Warranty