3 Get started
English
This surge protector is designed to guard the connected equipment against electrical damage. Philips offers an entire line of surge protectors to safeguard your home electronics and computer systems.
Connect the surge protector
1 | Remove the screw from the surge |
2 | protector. |
Plug the surge protector into a properly | |
| grounded outlet. |
| »»The [PROTECTED] indicator light is |
| on. |
3 | Install the screw through the surge |
| protector. (Optional) |
4 Plug the component power cord into the surge protector.
»»The connected device is protected.
Caution
•• If the [PROTECTED] indicator light is off when you plug in the surge protector, the unit should be replaced.
•• Do not use any extension cords, adapters, other grounding wire or electrical connections with your surge protector. Doing so will void all Philips warranties.
EN 5