Black Box LRB500A quick start Check List dialog box

Page 27

NET ACCESS BROADBAND ROUTER W/4-PORT SWITCH QUICK START GUIDE

NOTE

You may need to set a lower baud rate since the theoretical maximum connection speed may not be attainable due to variations in quality of phone line and ISP connection.

Click Next>> to complete the basic configuration.

15.The Check List dialog box will appear. It summarizes your configuration selections. Make sure that all values have been correctly entered. If you find an incorrect setting, click <<Back to return to the screen containing the error and correct it. When complete, use the Next>> button to return to the Check List dialog box.

Figure 3-13. Check List dialog box.

Click Finish to complete the configuration.

26

Image 27
Contents Quick Start Guide Federal Communications Commission Page NOM Statement Trademarks Used in this Manual Contents Related Documentation DescriptionIntroduction What the Package Includes Safety WarningsCabling the Router Cabling Your RouterPage Software Installation Software Installation and ConfigurationClick Install Software Using Broadband Manager Setup WizardSetup Wizard dialog box Setup Wizard Device List dialog box Setup Wizard Device IP Address dialog box Select Function dialog box External IP Assignment dialog box Asynchronous Port Function dialog box Use Local Client List Remote AccessPage Enter Radius Server Settings IP Routing NAT Enabled or IP Routing NAT Disabled Setup Wizard IP Routing dialog box10. Setup Wizard DNS IP Address dialog box 11. Setup Wizard Modem Settings dialog box Select your modem manufacturer and model and click OK Setup Wizard Modem Setting dialog box re-displays13. Check List dialog box 14. Note dialog box Testing Your Connection15. Connect screen Using Telnet to Configure Your Router16. Telnet Server Menu screen Page IP Mapping is available only when NAT is enabled Copyright 2001. Black Box Corporation. All rights reserved