Black Box LRB500A quick start Testing Your Connection, Note dialog box

CHAPTER 3: Software Installation and Configuration

16.The Note dialog box appears (see Figure 3-14). It indicates that you have completed the Setup Wizard.

Figure 3-14. Note dialog box.

Read the “IMPORTANT!” information contained in the dialog box. Click Run Monitor (recommended), Run Manager, or Exit.

3.3 Testing Your Connection

When you select Run Monitor, the Broadband Monitor program loads.

1.To test your current settings, select Test Connection. Select Connect Port 1 to test the WAN port. Select Connect Port 2 to test the async port. The monitor activity will appear in the display window. Refer to the Broadband Monitor chapter in the User Guide for additional information about the Router’s monitoring capabilities.

2.Before using the device, you must configure your workstations for TCP/IP. Refer to the LAN Client Settings chapter of the User Guide for configuration information.

27