Controls and Indicators, Unpacking | Black Box LMC200A-DC guide

CONTROLS AND INDICATORS

LEDs Display:

The Powered Chassis features two LEDs on the left front of the chassis, these LEDs display the status of the two power supplies.

Function	Color/State	Description
Top LED	Yellow / ON	Power OK in right power supply
Bottom LED	Yellow / ON	Power OK in left power supply

Note: Left/right direction as viewed from the front of the chassis.

SITE PREPARATION REQUIREMENTS

1.Power: Assure the 48VDC power can supply 3A of current.

2.The operating temperature of this equipment is 0-40 degrees C. If installed in a closed or multiunit rack assembly, the operating ambient temperature of the rack must not exceed the maximum rated 40 degrees C temperature.

3.Installation of the equipment should be such that the air flow in the front and back of the unit is not compromised or restricted.

4.Never use this equipment to carry any weight except its own, never use it as a shelf to support weight of other equipment.

5.Installing this equipment into a rack in such a way as to make it unstable may cause injury or death. Always make sure that the rack you are installing this equipment into is properly secure, stable, balanced and designed to carry the weight and weight distribution of this equipment.

6.When rack-mounting this equipment, the rack should be appropriately earth-grounded.

7.This equipment requires 48 VDC / 3.0 Amps per power supply. Appropriate overloading protection should be provided on all DC power source outlets utilized.

8.Wiring methods used for the connection of the equipment to the primary power supply shall be in accordance with the National Electrical Code, ANSI/ NFPA 70, and the Canadian Electrical Code, Part I, C22.1.

UNPACKING

a.Visual Inspection: Inspect equipment in order to detect any physical damage. Any evidence of damage should be noted and reported immediately.

INVENTORY

Review contents, the following items should be included:

(1)FlexPoint Powered Chassis unit.

(2)Power supplies (2 for model LMC200A-2PS-DC, 1 for model LMC200A-DC).

(14) L shape tabs.

(14) Screws

(1)User’s manual (this document).

Please note any missing items or discrepancies and report them immediately.

INSTALLATION

WARNING: Only a DC power source that complies with safety extra low voltage (SLEV) requirements can be connected to the DC-input power supply.

Tools and Equipment Required:

Flat-head screwdriver (not supplied) Wire cutter/stripper (not supplied)

Three-conductor 14 AWG copper power cable (recommended; not supplied)

Preparation:

Assure that the FlexPoint Chassis is physically installed in accordance with the Site Preparation Requirements outlined earlier in this document.

WARNING REGARDING EARTHING GROUND:

a)This equipment shall be connected to the DC supply system earthing electrode conductor or to a bonding jumper from an earthing terminal bar or bus to which the DC supply system earthing electrode is connected.

b)This equipment shall be located in the same immediate area (such as, adjacent cabinets) as any other equipment that has a connection between the earthed conductor of the same DC supply circuit and the earthing conductor, and also the point of earthing of the DC system. The DC system shall not be earthed elswere.

c)The DC supply source is to be located within the same premises as this equipment.

d)There shall be no switching or disconnecting devices in the earthed circuit conductor between the DC source and the earthing electrode conductor.

PSFP20-DC, LMC200A-DC, LMC200A-2PS-DC specifications

Black Box has made significant strides in delivering high-quality networking solutions with its PSFP20-DC, LMC200A-DC, and LMC200A-2PS-DC products. These devices are designed to enhance connectivity, networking capabilities, and efficiency in various applications.

The Black Box PSFP20-DC is a powerful and versatile Power over Ethernet (PoE) solution that simplifies the delivery of power and data over a single cable. This feature is especially beneficial in installations where access to electrical outlets is limited. The PSFP20-DC is equipped with robust power management capabilities, allowing it to support various devices, including IP cameras, wireless access points, and VoIP phones. With its compact design and ease of installation, this device is ideal for both indoor and outdoor applications. Additionally, it supports a wide input voltage range, ensuring compatibility with different systems and environments.

On the other hand, the LMC200A-DC is a media converter that facilitates the seamless integration of different types of network media. It supports the conversion of Ethernet signals over fiber optic cables, which is crucial for long-distance data transmission. This model is equipped with advanced technologies, including auto-negotiation and link fault pass-through, to ensure reliable network performance. The LMC200A-DC is renowned for its high-speed data transfer capabilities and can extend network reach significantly, making it suitable for businesses with expansive coverage needs.

Completing the trio, the LMC200A-2PS-DC is another variant of the media converter that offers even greater versatility. This model provides dual power supply options, which enhances its reliability in mission-critical applications. With its ability to function in a variety of environmental conditions, including extreme temperatures, the LMC200A-2PS-DC is designed to provide uninterrupted service and ensure network redundancy.

In conclusion, Black Box's PSFP20-DC, LMC200A-DC, and LMC200A-2PS-DC models exemplify the company's commitment to providing innovative networking solutions. Their advanced technologies, paired with user-friendly features, make them excellent choices for businesses looking to enhance their network infrastructure. Whether you need efficient power delivery, reliable media conversion, or robust redundancy, these products deliver exceptional performance aligned with modern networking demands.