4Screw the wall mount angle to the wall as shown in the illustration. (Total screw is 4 pieces)
•Make sure that the screw and the wall can support a load of 45 Ibs (20 kg).
Wall mount angle
"_ |
| ..... E. | Wall |
ws x 2) | / | '"_ | mount |
| /- | ,,,,/ | ang e |
Wall surface ( |
| _ |
|
.......(screws x 2) | X_ |
|
|
5Align the wall mount slot at the Sound Bar to the wall mount angle,
6Slot the Sound Bar into the wall mount angle,
7Fix them securely,
The Amplifier can be installed as below:
123
Horizontal | Vertical | On the wall |
To mount the Amplifier on the wall, perform the following steps.
1Make a hole on the wall using a drill.
//iA
3/8"
(8- 9 mm) _
2 Fix a wall mount plug into the hole using a hammer, until it is flush with the wall surface,
Note:
Make sure all screws are fully tightened. (screws are not supplied)
Safety wires (not supplied) are useful to prevent the Sound Bar from falling off the table.
Loop the safety wires (not supplied) into each hole as shown and tie the safety wires to the LCD TV stand.
3 Fix screws into the wall for the Amplifier, as shown in the illustration.
•Make sure that the screw and the wall can support a load of 45 Ibs (20 kg).
•Fix the screws, so the screw head extends about 7/32" (5.5 mm) from the wall.
Wall surface Wall mounting Wall surface screw
4 Fix the screws. Hook the Amplifier on the screw heads and make sure it is properly secured.