Sharp HT-SL72 operation manual To fix the Sound Bar stand, For 52 60 or 70 TV Sound Bar assembly

1

Makeinstallingsurethetounitunplugor changingthe ACthepowerpositioncord. before 1I

Select from three installation methods according to the preferred position.

To fix the Sound Bar stand

1.Peel off the double sided tape separator and attach the Sound Bar stand cushion at the bottom surface of the Sound Bar stand.

Sound Bar stand cushion

For 52" 60" or 70" TV Sound Bar assembly

Use Sound Bar cover joint 7-13/32" (188 mm) for 52" TV.

For model Use Sound Bar cover joint 14-17/32"

HT-SL77 (369 ram) for 60" TV.

Use Sound Bar cover joint 23-3/8" (594 ram) for 70" TV.

Sound	Bar	Double
stand
		sided
		tape
		separator
	Hook

2. Fix the Sound Bar stand as shown.

Formodel Use Sound Bar cover joint 14-17/32"

HT-SL72(369 mm) for 60" TV.

1. Pull out both joint covers as below.

Cover

Sound Bar joint

2.Place the two Sound Bars near to each other and slot in the Sound Bar joint and its covers as below.

For 46" TV sound bar assembly

HT-SL77FormodelforUSe46"SoundTvBarcover. joint 2-5/32" (55 mm)

1.Pull out the joint cover as below. Sound Bar joint (short)

Cover

Note:
Sound Barstand	can be removed		_,,,4f,
by pulling it off backward
the sound bar.
Suggestion		of the
Sound	Bars	and

LCD TV horizontal arrangement.

For 60" or 70" TV Sound Bar assembly only

Use Sound Bar stand cover : 10 - 2/16" (257 mm).

Use stand base : 13 - 7/32" (336 mm).

1. Pull out the cover of Sound Bar stand as below.

Sound Bar stand cover

_ Cover

2. Place the	two sound bars	adjacent to	each other and	2. Slot in the Sound Bar into the Sound Bar stand and fix
				its cover as shown.
slot in the	Sound Bar joint	and its cover	as below.