Caution:
• | Turn off | all other equipment | before making this connection. | |
Notes: |
|
|
| |
• Setthe TV at lowvolume beforeturningon thesystem. | ||||
• | GAINknob isinvalidduring DIGITAL(HDMI)function. | |||
• Makesureto set the correctinputselectoron theAmplifierto a preferred | ||||
| connectionbefore usingany of these methods. | |||
|
|
|
| Amplifier |
| ACTIVE | CONNECTION | INPUT | SELECTOR |
| HDMI |
| Set to | DIGITAL |
HEADPHONE OUT
Set to ANALOG
RCA
•This unit supports HDMI which enables ARC (AudioReturn Channel).
•To enable ARC make sure to use High Speed HDMITMcable (with ARC).
•This ARCfeaturerequiresTV that supportsARC. Refertheoperation manualof theTV to determinewhichterminalsupports ARC.
•To listen to the sound from a
•This unit can be operated (power on/off or volume up/down) via a TV or similar component which supports HDMI CEC (Consumer ElectronicsControl). If thisdoes notwork, it does not mean this system is faulty. Referto theoperation manualof the respectivecomponent on how to activate the CEC.
Example: Go to the Menu of the component to search and enable the CEC. Different brands may have different naming br the CEC. For SHARP LCD TV,it is named as AQUOS LINK.
•To listen to the sound from this system, you will need to adjust the speaker output settings within the TV menu. For details, refer to the operation manual of the TV.
•If you are unable to select external speaker setting from the TV menu (E.g. For SHARP LCD TV,it is named as AQUOS AUDIO SP), turn the CEC OFF and ON again.
•Makesure the LCD TV Audiooutput setting isset to PCM, not other formats such as DolbyDigital, DTS, etc.
•To enjoy3D images, this system must be connected to a
Select from the 2 methods below: 1. Method 1
This connection is for HDMI TV with ARC (Audio Return Channel).
TV | To TV HDMI in 3ut terminal |
|
| DVD, BD player |
Amplifier | _ | or similar |
| f |
|
| To TV HDMI (ARC) _=_ |
|
|
| terminal |
| To HDMI (TV ARC) output terminal |
|
Notes:
•Refer to the operation manual of the equipment to be connected.
•Fully insert the plugs to avoid fuzzy pictures or noises.
2. Method 2
This connection is for HDMI TV without ARC (Audio Return Channel).
Amplifier | To HDMI terminal | TV |
|
DVD, BD player or similar
To HDMI
HDMI OUTPUT input terminal
Notes for ANALOG connection:
•To enjoy sound from TV via this unit, set the input selector switch on the Amplifier to ANALOG.
•If the sound is too low, use the GAIN knob to adjust it to your desired level.
•Connecting via this method may disable TV internal speakers.