Black Box ServSensor, EXP 8 manual Sensor Settings

Page 12

ServSensor EXP 8

4. Click on the temperature sensor’s name (indicated in previous screen). The Sensors page appears.

Figure 3-7. Sensor Settings page.

NOTE: You can also access this page by clicking on the “Sensors” tab at the top of the page. 5. Extended ports are listed from 1–4 on the left side of the Sensor Menu page.

Figure 3-8. Sensors menu on Sensor Settings page.

6. Click the Temperature Sensor icon (or another type of sensor icon).

Page 12

724-746-5500 blackbox.com

Image 12
Contents Connect additional intelligent sensors to the ServSensor V4E ServSensor EXP Trademarks Used in this ManualFCC and IC RFI Statements ServSensor EXP Table of Contents Specifications Overview Overview IntroductionWhat’s Included Function Description Upgrade in progress Hardware Description Front PanelBack Panel Back panelInstallation Connecting to the Base Unit Installation Setting up a Sensor Standard ConfigurationSensor Settings Click on the sensor icon Shown in -10 appears Setting up a Sensor Daisychained Configuration 12. E-in portInstallation 16. Temperature sensor settings icon 17. Sensor Settings page for Temperature Sensor on Port Notifications Adding a NotificationNotifications Snmp TrapServSensor EXP Selecting setting and trap name Select the expansion board, then select the sensor Appears. Select the status and action, then click Finish Black Box Tech Support FREE! Live /7 About Black Box