Black Box EXP 8, ServSensor manual FCC and IC RFI Statements

Page 3

FCC and IC RFI Statements

Federal Communications Commission and Industry Canada Radio Frequency Interference Statements

This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference­ to radio communication. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart B of Part 15 of FCC rules, which are designed to provide reasonable protection against such interference when the equipment is operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference, in which case the user at his own expense will be required to take whatever measures may be necessary to correct the interference.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This digital apparatus does not exceed the Class A limits for radio noise emission­ from digital apparatus set out in the Radio Interference Regulation of Industry Canada.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe A prescrites dans le Règlement sur le brouillage radioélectrique publié par Industrie Canada.

724-746-5500 blackbox.com

Page 3

Image 3
Contents Connect additional intelligent sensors to the ServSensor V4E Trademarks Used in this Manual ServSensor EXPFCC and IC RFI Statements ServSensor EXP Table of Contents Specifications Overview Overview IntroductionWhat’s Included Hardware Description Front Panel Function Description Upgrade in progressBack panel Back PanelInstallation Connecting to the Base Unit Setting up a Sensor Standard Configuration InstallationSensor Settings Click on the sensor icon Shown in -10 appears 12. E-in port Setting up a Sensor Daisychained ConfigurationInstallation 16. Temperature sensor settings icon 17. Sensor Settings page for Temperature Sensor on Port Adding a Notification NotificationsSnmp Trap NotificationsServSensor EXP Selecting setting and trap name Select the expansion board, then select the sensor Appears. Select the status and action, then click Finish About Black Box Black Box Tech Support FREE! Live /7