CHAPTER 4: Startup/Configuration
The General Parameters menu offers the following options:
1.System Password: (Up to 16 characters, case sensitive.) When the system password is defined, the
NOTE
If the system password is not defined, the password prompt will not be displayed, and the
2.Site ID: Defines a text string (up to 32 characters) that denotes the installation site. To define the Site ID, type 2 and press [Enter]. (Default = undefined.)
3.Modem Initialization String: To define the modem initialization string (up to 32 characters), type 3 and press [Enter]. For more information on the initialization string, please refer to the user’s guide for your external modem. Make certain that the modem is set to
ATE0M0Q1&C1&D2S0=1.)
4.Modem Disconnect String: To define the Disconnect String (up to 32 characters), type 4, press [Enter], and follow the instructions in the submenu. For more information, please refer to the user’s guide for your external modem. (Default = undefined.)
5.Baud Rate: To select the baud rate for the modem port and console port, type 5, press [Enter], and follow the instructions in the submenu. Make certain to select a rate that is compatible with the external modem and/or the device connected to the console port. (Default value determined by option switch 1; Factory setting = 9600.)
NOTE
When this setting is changed, the new baud rate will not be applied until
you exit and then
6.Command Echo: Enables/disables the command echo. When enabled, commands sent to the
21