Black Box SWI082, SWI081AE manual Boot/On/Off Commands, User Status screen

Page 32

DUAL-PORT NETWORK POWER SWITCH

When the user mode is active, the /S command will produce the screen shown in Figure 5-2. It lists the status and parameters only for the plug(s) owned by the user password entered at login. If a separate user password has been assigned to the other plug, the User Mode Status screen will not list the status for that plug. In user mode, plug passwords cannot be displayed.

Dual-Port Network Power Switch v1.00 Site: BLACK BOX CORPORATION

Plug

Name

Status

Boot Delay

Password

Default

2

ROUTER_B

OFF

15 Sec

(defined)

ON

Modem Init. String:

ATE0M0Q1&C1&D2S0=1

 

 

Modem Disc. String:

+++ATZ

 

 

 

Communication Settings:

9600,N,8,1

 

 

 

Command Echo:

OFF

 

 

 

Disconnect Timeout:

30 Min

 

 

 

Command Confirmation:

ON

 

 

 

Automated Mode:

OFF

 

 

 

Button Mode:

ON

 

 

 

“/H” for Help

Figure 5-2. User Status screen.

5.3 Boot/On/Off Commands

These commands are used to boot or toggle the on/off status of the Dual-Port Network Power Switch’s two switched plugs. If the same password has been applied to both switched plugs, commands can be directed to plug 1, plug 2, or both switched plugs. If a separate user password has been assigned to each plug, then commands can only be applied to the plug that is owned by the user password that was entered at login. Plugs may be specified by name or number.

NOTES

When user mode is active, commands will only be applied to plugs owned by the user’s password. Commands will not affect a plug owned by another user password.

When system mode is active, commands can be applied to both switched plugs.

Wait for the “TPS>” prompt to appear before entering commands. The prompt will not reappear until the previous command is complete.

Commands are not case sensitive. All commands are invoked by pressing [Enter].

30

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Dual-Port Network Power Switch Page European Union Declaration of Conformity DUAL-PORT Network Power Switch NOM Statement Trademarks Used in this Manual Keep the installation stable by avoiding uneven loading DUAL-PORT Network Power Switch Contents Contents Specifications Operating Temperature 32 to 113F 0 to 45CDescription FeaturesIntroduction Front Panel Front panelBack Panel Back panelInstallation Option SwitchesConsole Port Connection Connecting an External ModemConnecting the Network Cable Reset Unit to Defaults Power Supply ConnectionConnection to Switched Outlets This method will temporarily switch all plugs off Startup/Configuration System Mode and User ModeCommunicating with the Dual-Port Network Power Switch System Help screen Switch Command/Menu Conventions Defining General ParametersATE0M0Q1&C1&D2S0=1 DUAL-PORT Network Power Switch Plug Parameters Plug #1 ParametersNetwork Parameters Network Parameters menu system mode only IP Security menu Save Configuration Parameters Access the Switch Command Mode OperationOperation Displaying Plug StatusBoot/On/Off Commands User Status screenOn 2 or /ON Router Default Command Automated ModeOther Commands Manual Operation Operating TipsOperation Restoring Saved Parameters Saving and Restoring Configuration ParametersSending Parameters to a File Saving and Restoring Configuration Parameters Modem Port Interface Appendix A. Interface DescriptionsConsole Port Interface Appendix B. Optional Rackmounting Bracket Instructions Figure B-1. Rackmounting Shipping and Packaging Appendix C. TroubleshootingCalling Black Box Copyright 2002. Black Box Corporation. All rights reserved
Top Page Image Contents