SERVSWITCH PANTHER
3.10Avoiding general rack mounting problems
3.10.1Elevated operating ambient temperature
The operating ambient temperature of the rack environment may be greater than the room ambient when installing into a closed or
3.10.2 Reduced airflow
Install the equipment in a rack in such a way that the amount of airflow required for safe operation is not compromised.
3.10.3 Mechanical loading
Mount the equipment in the rack in such a way that a hazardous condition is not achieved due to uneven mechanical loading.
3.10.4 Circuit overloading
When connecting the equipment to the supply circuit, consider the effect that overloading of circuits might have on
Reliable earthing of
3.11 Rack mounting the ServSwitch Panther
Length of the screws used for connection of the bracket to the ServSwitch Panther unit shall not exceed 5 mm.
Use the
|
|
|
|
|
|
|
| Insert |
|
|
|
|
|
|
|
| screws to |
|
|
|
|
|
|
|
| connect to |
|
|
|
| COMPUTER |
|
| rack | |
| 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 |
POWER |
|
|
|
|
|
|
|
|
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | |
|
|
|
|
|
|
|
| Insert screws to connect |
|
|
|
|
|
|
|
| to Switch side panel |
Figure 7 Connecting the L-shaped bracket
14 |