Operating System Installation | Black Box RS422/485 instruction

DUAL- AND QUAD-PORT USB HUBS

3.Installation

3.1Operating System Installation

Choose Install Software at the beginning of the CD and follow the prompts to install SeaCOM.

3.2 System Installation

The screen capture shown in Figure 3-1 is taken from a Windows® 98 installation. Your particular operating system may differ slightly from what is shown, based on your version of Windows.

The USB Hub can be connected to any upstream type A port either at the PC host or an upstream hub. The USB Hub is hot pluggable, meaning that you don’t have to power down your computer before installation.

Connect the USB Hub to an upstream host or hub.

The New Hardware Found wizard will now locate the appropriate drivers. These drivers were installed during the software setup procedure. Once the drivers are found, a new window will pop up indicating the installation of each of the four new ports.

If you view the Device Manager, you should have new COM ports in the Ports (COM & LPT) device class; this is shown in Figure 3-1.