Black Box SW176A, SW175A manual DIP-Switch Settings, Reset Button

COMPACT BIDIRECTIONAL AUTOSWITCH

DIP-Switch Settings

There are four DIP switches located at the side of the AutoSwitch. Switch 1 controls form feed, 2 and 3 set the the timeout length, and 4 is not used. The tables below show you the DIP-switch settings for enabling or disabling form feed, and for setting the time-out for 5, 10, 20, or 40 seconds.

1FORM FEED

ON ENABLE OFF DISABLE

2	3	TIME-OUT
ON	ON	5 sec.
ON	OFF	10 sec.
OFF	ON	20 sec.
OFF	OFF	40 sec.

The Reset Button

The RESET button resets the AutoSwitch if it locks up. Note that print jobs may be lost if the button is pressed during printing.

8