CHAPTER 4: Operation
4.2.3PROGRAMMING
1)Device labels
2)Password
3)Baud: 19200
4)Parity/Data: N,8
5)Lead: N
6)Resp: Y
7)Mode: Modem
8)Cycle time: 5
9)Time out: 0
X)Exit Enter >1
Figure 4-5. Programming menu.
1)Device Labels. This lets you change the screen labels for the ports and power- control outlets.
A)PORT A
B)PORT B
C)PORT C
D)PORT D
1)Outlet 1
2)Outlet 2
3)Outlet 3
4)Outlet 4
X)Exit Enter >
Figure 4-6. Device labels.
Enter the label you want to change. The current label is displayed, along with a prompt for the new name. Type in a new label and then confirm the selection. Labels can be up to 24 characters.
CURRENT LABEL PORT A PORT A
NEW LABEL PORT A> Your New Name
PORT LABEL CHANGED FROM PORT A
TO Your New Name
SAVE CHANGES? (Y/N) >
Figure 4-7. Entering new label name.
15