Black Box SW555AE, SW556AE manual Operation

Page 16

CHAPTER 4: Operation

The Remote Management Switch automatically detects the rate of operation, allowing connection at 300 bps to 115.2 kbps. Using the default speed will allow the fastest access to the unit. To invoke the auto rate detector, press the Enter key one or more times as needed. When the Switch detects the rate, it will respond with the security login prompt:

Login >

Enter the default security code (the default code is “TEST,” all caps, case-sensitive). Three incorrect attempts to enter the security code will cause the Switch to terminate the call. When you enter the correct code, the main menu appears.

Remote Management Switch Ver XXX

1)Port Selection

2)Relay Control

3)Programming X) Logout

Enter >

Figure 4-1. Main menu.

4.2.1PORT SELECTION

From the main menu, choose 1) Port Selection. This selection connects the master port to any of ports A through D. The port-selection menu shown in Figure 4-2 appears.

A)PORT A

B)PORT B

C)PORT C

D)PORT D

X)Exit

Enter Port >

Figure 4-2. Port-selection menu.

Once you select a port, the Switch will clear the screen and generate the following message:

x Selected (x=the programmed name of the port) Enter ESC{PASSWORD}ESC to return to menu

13

Image 16
Contents Copyright 2001. Black Box Corporation. All rights reserved Remote Management Switch Page FCC Information Remote Management Switch NOM Statement Trademarks Used in this Manual Contents Specifications Introduction Power ControllerPort Selector Installation Master and Switched PortsInstallation RTS/DTR Selection Location of componentsConnecting the modem to a dial line Internal Modem Option SW556A, SW556AEFour Modes of Operation OperationMenu Control Operation Controlling outlets Programming menu Entering a new password Escape Code Control Lead Control of Ports Manual Control of Ports