Remington 500V Tool Assembly, Removing Advance BAR, Removing Baffle Assembly

G. REMOVING ADVANCE BAR

1.Using a 3mm hex wrench, loosen screws on cover and remove.

2.Remove advance pin with hammer and punch.

3.Remove advance bar and spring.

Screws

Cover

Advance Pin

Advance Bar and Spring

Housing

Figure 11 - Removing Advance Bar

H. REMOVING BAFFLE ASSEMBLY

1.Loosen and remove baffle assembly and o-ring.

Housing Handle

O-Ring

Baffle Assembly

Figure 12 - Removing Baffle

I. REMOVING OUTER LINER ASSEMBLY FROM HOUSING

1.Grasp outer liner assembly and firmly pull from housing.

Outer Liner Assembly

Housing

Figure 13 - Removing Outer Liner Assembly

Tool Assembly

WARNING: Always unload a powder actuated tool before disassembling, replacing barrel, cleaning, or assembling.

A. INSERTING OUTER LINER ASSEMBLY

1.Firmly push outer liner assembly into housing (see Figure 14).

Housing

Outer Liner Assembly

Figure 14 - Inserting Outer Liner Assembly

106763 Continued

21