Tool Disassembly (Cont.)
E. REMOVING FIRING PIN
1.Slide firing pin guide back so the slot in the firing pin guide lines up with the slot in the outer liner assembly.
2.Pull the sear out of the aligned holes (see Figure 8).
3.Slide firing pin guide off of the outer liner assembly (see Figure 9). Pull the firing pin assembly with sear spring out of the outer liner assembly. Remove sear spring from firing pin assembly (see Figure 9).
4.Remove transfer pin and push pin from outer liner assembly (see Figure 9).
Sear | Outer Liner | |
| ||
| Assembly | |
| Sear Spring | |
Firing Pin | Firing Pin | |
Guide | ||
Guide | Transfer Pin | |
Outer Liner Assembly | ||
Push Pin | ||
| ||
Figure 8 - Removing Sear | Firing Pin | |
| Assembly | |
| Figure 9 - Removing Firing Pin | |
| Guide, Firing Pin Assembly, Sear | |
| Spring, Transfer Pin, and Push Pin |
F. REMOVING TRIGGER AND PAWL ASSEMBLY
1.Slide trigger out of housing (see Figure 10).
2.Using a phillips head screw driver, loosen screw and remove pawl assembly components from housing (see Figure 10).
Housing
Pawl
Assembly
Trigger
Figure 10 - Removing Trigger and Pawl Assembly
106763
20
