•“1100 CRT board assembly (with cable)” on page 68
•“1110 Speaker assembly” on page 69
•“1120 I/O board (for ThinkPad X120e)” on page 70
•“1130 System board, fan assembly, and backup battery” on page 71
Table 25. Removal steps of DC-in cable and base cover assembly
1
2
3
Note: Applying labels to the base cover
For ThinkPad X100e
The new base cover FRU is shipped with a kit containing labels of several kinds. When you replace the base cover, you need to apply the following labels:
2
3
5
6
9
10
Homologation label
FFC label
Certified label under battery
Serial number barcode blank label
Information label under door
SIM information label under door
Following labels need to be peeled off from the old base cover, and need to be put on the new base cover.
1
4
7
8
Windows license label (COA) (only for Windows 7 models)
Ethernet label
Wireless WAN label
China Wireless WAN label
For some models, you also need to apply one or two FCC labels. Check the old base cover; if it has one or two FCC labels, find duplicates of them in the label kit and apply them to the new base cover.
For the location of each label, refer the following figure:
