ULTRA2 LVD SCSI HOST ADAPTER
/X:
• | /X0:1:2 | This will exclude the drive on SCSI Host Adapter 0 (that is, the |
|
| Adapter on the PCI bus that the motherboard has designated |
|
| number zero) whose target ID is 1 and whose LUN is 2. |
• | /X0:2 | This will exclude the drives on SCSI Host Adapter 0 whose target |
|
| ID is 2, no matter what LUN they have. |
• | /X0 | This will exclude all of the drives on SCSI Host Adapter 0. |
When DOSSETUP installs INIDISK.SYS, it will add command lines like those shown below to your CONFIG.SYS file. (These examples assume that the Adapter drivers have been installed in the “C:\INIASPI” directory.)
CONFIG.SYS:
DEVICEHIGH=C:\INIASPI\ASPIA100.SYS
DEVICEHIGH=C:INIASPI\INIDISK.SYS /R2
The first line loads the ASPI Manager and the second line loads the SCSI disk driver, specifying that a minimum of two drive letters be reserved for each MO and removable disk attached to the SCSI bus.
42