Fujitsu XG0224 manual Time Setting, Command

XG0224 Hardware Guide Chapter 2 Installation

2.5Time Setting

Make sure to set up the time before you do other settings of the switch. The time is not set at the initial timing of purchase. Please refer below command for setting up time manually using console or telnet.

zCommand

When setting time and date to be “Jan 1, 2009 12:30:00am” type in command

# date 2009/01/01.12:30:00
XG0224# configure	Switch to Configuration mode.
XG0224(config)# time zone -0500	When setting time zone to be “-0500“.
XG0224(config)# commit	Apply the configuration.
XG0224(config)# save	Save the configuration.
XG0224(config)# exit	Switch to Operation mode.
XG0224# date 2009/01/01.12:30:00	Set time and date to be “Jan 1, 2009 12:30:00am“.

44 Time Setting