3.3 DIP Switch Settings
The factory default settings are as follows: 1 2 3 4 5 6 7 8
ON
OFF
DIP Switch Functions
(*Note: the 
indicates the switch position)
SW | Function | ON state / OFF state | ||
1 | Hot Key Mode: <Ctrl>+<Alt>+<Shift> | ON: enabled / OFF: disabled | ||
2 | Hot Key Mode: Double <Ctrl> | ON: enabled / OFF: disabled | ||
3 | Hot Key Mode: Double <Scroll Lock> | ON: enabled / OFF: disabled | ||
4 | Country Setting bit 1 | (see following table) | ||
5 | Country Setting bit 2 | ( | “ | ) |
6 | Country Setting bit 3 | ( | “ | ) |
7 | Country Setting bit 4 | ( | “ | ) |
8 | Power Mode Setting | ON: | the switch device is always ON. | |
|
| OFF: | the switch device turns ON if any connected | |
|
|
| host is turned ON. | |
The country code (language) settings are as follows:
Country Setting | SW4 | SW5 | SW6 | SW7 |
Japan | ON | ON | ON | ON |
US | ON | ON | ON | OFF |
UK | ON | ON | OFF | ON |
German | ON | ON | OFF | OFF |
French | ON | OFF | ON | ON |
Spanish | ON | OFF | ON | OFF |
Swedish | ON | OFF | OFF | ON |
The country code (language) settings are as follows:
Country Setting | SW4 | SW5 | SW6 | SW7 |
|
|
|
| |
JPN | ON | ON | ON | ON |
USA | ON | ON | ON | OFF |
|
|
|
|
|
GBR | ON | ON | OFF | ON |
GER | ON | ON | OFF | OFF |
FRA | ON | OFF | ON | ON |
ESP | ON | OFF | ON | OFF |
SWE | ON | OFF | OFF | ON |
POR | ON | OFF | OFF | OFF |
TPE | OFF | ON | ON | ON |
KOR | OFF | ON | ON | OFF |
ITA | OFF | ON | OFF | ON |
UNIX | OFF | ON | OFF | OFF |
NOR | OFF | OFF | ON | ON |
BEL | OFF | OFF | ON | OFF |
DEN | OFF | OFF | OFF | ON |
10