6.2.2. Hot Key Mode B
Press the <Ctrl> key twice to go into the Hot Key Mode and the following OSD screen appear in the
a) Screen Details
1). Selected host name is shown in the OSD in the upper left of the screen.
2). Before switching the text background turns in red.
3). After switching the text background turns in blue, and the Hot Key Mode is exited after the switch is completed.
4). The OSD disappears about 3 seconds later.
b) Host Switching
When the text background turns in red, the desired host may be switched to by pressing the matching number key(s):
For a cascaded setup, first use the number keys <1>~<8> to select a
Switching occurs immediately after the appropriate keys are pressed, and the OSD reverts to the normal console (Hot Key Mode is finished).
No normal keyboard or mouse input is accepted while the text background is in red.
To change the text background back to blue (exit Hot Key Mode), either press a number key (combination), or press the <Esc> key, or the <Enter> key.
If the <0> key is pressed while the text background is red, Auto Scan Mode is entered. Auto Scan Mode may be cancelled as follows:
<Enter> key: Console switches to the currently displayed screen (host).
<Esc> key: Console reverts to the host active before Auto Scan Mode was entered.
6.3. Showing/Hiding Host Names Function
[Showing/Hiding Host Name Function]
When the device is operating in normal Console Mode, holding the <Shift> key down and pressing the <Scroll Lock> key twice make the host name for the currently selected channel to be shown in the
If the host name is being displayed, holding the <Shift> key down and pressing the <Scroll Lock> key twice again changes the host name to disappear from the screen. (Hiding Host Names)
The factory default is hiding the host names.
The showing host name is not appeared when Hot Key Mode, Auto scan mode is active.
While in the Hot Key Mode, holding the <Shift> key down and pressing the <Scroll Lock> key twice will not change the host name to be shown/hidden.
The current Show/Hide Host Name state is retained after switching the host via selector buttons or OSD.
21