Black Box DVI/VGA USB/PS2 1-Port KVM Module Appendix Troubleshooting, Powering On the ServTray

Page 11

Appendix: Troubleshooting

3.Connect the other end of the 3-in-1 or 2-in-1 cable to the monitor, keyboard, and mouse ports on the computer. See Figure 3-2.

HD15 keyboard,

mouse, and monitor

connection

DVI

cable

3-in-1 cable

PS/2 or USB

computer

Figure 3-2. Console keyboard, mouse, and monitor connections.

NOTE: One video signal is supported at any given time.

3.2.2 Powering On the ServTray

Connect the power adapter’s barrel connector to the power jack on the rear of the module. Then plug the power supply into an available power outlet.

Page 11

Image 11

Contents DVI/VGA USB/PS2 1-Port KVM Module Trademarks Used in this Manual Trademarks Used in this ManualFCC and IC RFI Statements NOM Statement Table of Contents Specifications SpecificationsRear Panel OverviewOverview Introduction Components Front PanelTypical Applications What’s IncludedConnecting the Computer Console, Keyboard, and Mouse InstallationHardware Installation To-1 PS/2 cable and 2-to-1 USB cables all included Powering On the ServTray Appendix TroubleshootingAppendix. Troubleshooting Problems/Possible Causes/Solutions Shipping and Packaging Contacting Black BoxBlackbox.com Page Black Box Tech Support FREE! Live /7