•In BT mode, the Play I Pause I Next I Prev functions are not available. However, these functions are available in Bluetooth devices supporting AVRCP.
TV SOUNDCONNECT
You can enjoy TV sound through your Soundbar when 1t is connected to a Samsung TV that supports the TV SoundConnect function .
Connecting a TV to the Soundbar
(<< | >)) ••••• |
| Connect |
1.Turn on the TV and Soundbar.
•Set the "Add New Device" menu of the TV to liOn".
2.Press the ,.:. I (Function) button on the main unit'stop panel or the SOURCE button on the remote control to select the TV mode.
3.On the TV, a message asking whether to enable the TV SoundConnect function appears. "[Samsung] Soundbar" is also displayed on the TV screen.
4.Select <Yes> to finish connecting the TV and Soundbar using the TV'sremote control.
....; The TV SoundConnect (SoundShare) function is
supported by some Samsung TVs released from 2012 on. Check whether your TV supports the TV SoundConnect (SoundShare) function before you begin. (For further information, refer to the TV'suser manual.)
....; If your Samsung TV was released before 2014,
check the SoundShare setting menu.
....; If the distance between the TV and Soundbar
exceeds 16.25 ft, the connection may not be stable or the audio may stutter. If this occurs, relocate the TV or Soundbar so that they are within operational range, and then
....; TV SoundConnect Operational Ranges:
-Recommended pairing range: within 20 inches
-Recommended operational range: within 16.25 ft
....; The Play/Pause, Next, and Prev buttons on the
Soundbar or Soundbar'sremote do not control the TV.
USB
You can play music files located on USB storage devices through the Soundbar.
USB port | Display |
1.Connect the USB device to the USB port on the back of the product.
2.Press the ,.:. I (Function) button on the main unit'stop panel or the SOURCE button on the remote control to select the USB mode.
3.USB appears on the display screen.
•The Soundbar connection to the USB device is complete.
•The Soundbar automatically turns off (Auto Power Off) if no USB device has been connected for more than 25 minutes.
AUTO POWER LINK
If you have connected the main unit to a TV w1th a digital optical cable, set the Auto Power function ON to have the Soundbar turn on automatically when you turn the TV on.
I AUTO POWER LINK | Display | I |
ON | ANYNET+ OFF I |
|
POWER LINK ON |
| |
|
| |
OFF | ANYNET+ ON I |
|
POWER LINK OFF |
| |
|
|
1.Connect the Soundbar and an External Device with an Optical cable.
2.Press the ,.:. I (Function) button on the main unit'stop panel or the SOURCE button on the remote control to select the D.IN mode.
3.Press the Anynet+ button on the remote control to toggle the Auto Power Link function on and off.
....; Depending on the connected device, Auto
Power Link may not function .