Samsung HWH7500 Remote Control Buttons and Functions, Source, Audio Sync, Equalizer Woofer

Page 9

REMOTE CONTROL

REMOTE CONTROL

Remote Control Buttons and Functions

SOURCE

Press to select a source connected to the Soundbar.

Mute

You can turn the volume down to 0 with the push of a button.

Press again to restore the sound to the previous volume level.

Repeat

Press to set the Repeat function during music playback from a USB device. REPEAT OFF : Cancels Repeat Playback.

REPEAT FILE : Repeatedly play a track.

REPEAT ALL : Repeatedly play all tracks.

REPEAT RANDOM : Plays tracks in random order.

(A track that has already been played may be played again.)

Skip Forward

If there is more than one file on the device you are playing, and you press the ] button, the next file is selected.

AUDIO SYNC

If the Soundbar is connected to a digital TV and the video appears out of sync with the audio, press the AUDIO SYNC buttons to sync the audio with the video. Use the [,] buttons to set the audio delay between 0 ms and 300 ms. In USB mode, TV mode, and BT mode, the Audio Sync function may not work.

Anynet+

Press the Anynet+ button to turn the Anynet+ function on or off.

(Auto Power Link : Default OFF, Anynet+ ON / Power Link Off or Anynet+ OFF / Power Link ON ). The Anynet+ function lets you control the Soundbar with the remote from an Anynet+ compatible Samsung TV. The Soundbar must be connected to the TV via an HDMI cable.

*Auto Power Link

Synchronizes the Soundbar to a connected Optical source via the Optical jack so it turns on automatically when you turn on your TV. (See page 22)

EQUALIZER WOOFER

Press to select TREBLE, BASS, or SW. Then, use the [,] button to adjust the Treble, Bass, or Subwoofer volume from -6 to +6.

Press and hold the EQUALIZER WOOFER button for about 5 seconds to adjust the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2KHz, 2.5KHz, 5KHz, 10KHz, and SW are selectable and each can be adjusted to a setting between -6 and +6.

●● Adjusting TREBLE, BASS, or SW affects the 10KHz band, the 150Hz band, and SW respectively. For example, when you adjust TREBLE, you are actually adjusting the 10KHz frequency band.

Soundbar is a Samsung proprietary name.

Operate the TV using the TV's remote control.

ENG

9

Image 9
Contents This Nanum Gothic Eco font is provided by Naver Curved SoundbarFeatures Licenses++Copyright Safety Warnings Safety InformationPrecautions Contents Getting Started ++Safety Instructions and TroubleshootingBefore reading the User’s Manual What’s IncludedTop / Front Panel DescriptionsHdmi Rear / Bottom PanelRemote Control Buttons and Functions Remote ControlSource Audio Sync++Installing the Battery in the Remote Control Sound EffectAUTO, ON, OFF TV-mounted Installation InstallationStanding Installation Assembling the Clamp- wire Connections Connecting the Wireless SubwooferHdmi Cable Not supplied Connecting an External Device using an Hdmi cableHdmi Cable Not supplied Digital Devices HdmiOptical OUT Optical CableAUX OUT Audio CableInput mode FunctionsHdmi Cable Bluetooth ++To connect the Soundbar to a Bluetooth deviceConnect Bluetooth device ++To disconnect the Bluetooth device from the Soundbar ++Bluetooth Power On Bluetooth Power++To disconnect the Soundbar from the Bluetooth device More About Bluetooth++Using the Bluetooth Power On function ++Connecting a TV to the SoundbarTV SoundConnect Connect++Before you connect a USB device Auto Power Link Software UpdateAuto Power DisplayTroubleshooting Specifications AppendixUSB Limited Warranty to Original Purchaser WarrantyCountry Call Or Visit US Online ATWrite Installation 1J1J Standing InstallationConnections JOt--------El c-J Connecting AN External Device Using AN Hdmi CableFunctions TV Soundconnect