Black Box CLM5000 manual Changing Opens/Capacitance Coefficient Using Set Length, Tone Mode

Cable Length Meter

Changing Opens/Capacitance Coefficient Using Set Length

To change capacitance coefficients, follow the steps above (cable/wire must be open) based on the sample wire (100 to 200 feet). The Cable Length Meter measures the total capacitance of the cable and displays the value in the lower left- hand corner of the LCD (the cable must be within 10 to 40 pf per feet range, other- wise meter will indicate OL).

Table 4-3. Opens/shorts factory default values.

Mode	Capacitance Opens	Ohms per Feet/AWG Shorts
Coax	22.0 pf	0.0663 ohms/NA
Network	15.0 pf	0.0273 ohms/24 AWG
Telco	17.5 pf	0.0273 ohms/24 AWG

Figure 4-5. BNC-to-F connection for measuring coax.

4.4 Tone Mode

To generate a tone on the cable/wire, select Tone Mode (see Figure 4-6). The Cable Length Meter has four unique tones. Use the UP/DOWN keys, to scroll through the four tones. The tones generated match audio frequencies used with tone tracers/ probes. The signal generated on a pair is nominal 5 volts peak-to-peak across the pair. The unit will power down automatically after 1 hour.

Available tones include:

1.High tone 1 KHz

2.Low tone 704 Hz

3.Warble tones, low tone for 160 ms, followed by 115 ms of high tone

Page 18 724-746-5500 blackbox.com