Connecting to Power
Redundant DC Terminal Block Power Inputs or
Redundant DC Terminal Block Power Inputs
Two pairs of power inputs can be used to power up this device. You only need to have one power input connected to run the Hardened Ethernet Extender.
Step 1: Connect the DC power cord to the pluggable terminal block on the Hardened Ethernet Extender, and then plug it into a standard DC outlet.
Step 2: Disconnect the power cord if you want to shut down the Hardened Ethernet Extender.
48VDC DC Jack
Step 1: Connect the supplied AC to DC power adapter to the receptacle on the top side of the Hardened Ethernet Extender.
Step 2: Connect the power cord to the AC to DC power adapter and attach the plug to a standard AC outlet with the appropriate AC voltage.
User’s Manual | 15 |