TRENDnet User’s Guide

Create your Wireless security Passphrase (password or key):

Passphrase – Enter the passphrase.

oThis is the password or key that is used to connect your computer to this router wirelessly

Confirmed Passphrase Re-enter the passphrase.

Note: 8-63 alphanumeric characters (a,b,C,?,*, /,1,2, etc.)

The following section outlines options when selecting EAP (Extensive Authentication Protocol),

EAP (Extensible Authentication Protocol) is also called Remote Authentication Dial-In User Service or RADIUS.

Select a Cipher Type

oWhen selecting WPA security, it is recommended to use TKIP.

oWhen selecting WPA-Autosecurity, it is recommended to use AES. o When selecting WPA2 security, it is recommended to use AES.

TEW-731BR

RADIUS Server 1/2 - Configure the RADIUS server settings.

Note: RADIUS Server 2 is optional and can be configured as a backup if there are any issues with RADIUS Server 1.

oIP – Enter the IP address of the RADIUS server. (e.g. 192.168.10.250)

oPort – Enter the port your RADIUS server is configured to use for RADIUS authentication.

Note: It is recommended to use port 1812.

oShared Secret – Enter the shared secret used to authorize your router with your RADIUS server.

Connect wireless devices to your router

A variety of wireless network devices can connect to your wireless network such as:

Gaming Consoles

Internet enabled TVs

Network media players

Smart Phones

Wireless Laptop computers

Wireless IP cameras

Each device may have its own software utility for searching and connecting to available wireless networks, therefore, you must refer to the User’s Manual/Guide of your wireless client device to determine how to search and connect to this router’s wireless network.

See the “Appendix” on page 53 for general information on connecting to a wireless network.

© Copyright 2012 TRENDnet. All Rights Reserved.

15

Page 18
Image 18
TRENDnet TEW731BR manual Connect wireless devices to your router