TRENDnet User’s Guide |
5.Complete the optional settings only if required by your ISP.
6.To save changes, click Apply.
Note: If you are unsure which Internet connection type you are using, please contact
your ISP. Note: If your ISP requires a host name to be specified, you can specify it under Main > LAN & DHCP Server, in the Host Name field. To save changes, click Apply at bottom of the page.
Clone a MAC address
Main > WAN
On any home network, each network device has a unique MAC (Media Access Control) address. Some ISPs register the MAC address of the device (usually a router or a computer) connected directly to the modem. If your computer MAC address is already registered with your ISP and to prevent the
Note: For many ISPs that provide dynamic IP addresses automatically, typically, the stored MAC address in the modem is reset each time you restart the modem. If you are installing this router for the first time, turn your modem before connecting the router to your modem. To clear your modem stored MAC address, typically the procedure is to disconnect power from the modem for approximately one minute, then reconnect the power. For more details on this procedure, refer to your modem’s User Guide/Manual or contact your ISP.
1.Log into your router management page (see “Access your router management page” on page 27).
2.Click on Main, and click on WAN.
3.Under your Internet connection settings, find the MAC Address section shown below.
4.Click either Clone MAC Address to clone the MAC address of the computer you are currently using or manually enter the
5.To save changes, click Apply.
© Copyright 2012 TRENDnet. All Rights Reserved.
29
