TRENDnet User’s Guide

Connect wireless devices using WPS

WPS (Wi-Fi Protected Setup) is a feature that makes it easy to connect devices to your wireless network. If your wireless devices support WPS, you can use this feature to easily add wireless devices to your network.

Note: You will not be able to use WPS if you set the SSID Broadcast setting to Disabled.

There are two methods the WPS feature can easily connect your wireless devices to your network.

Push Button Configuration (PBC) method

oRECOMMENDED Hardware Push Button method–with an external button located physically on your router and on your client device

oWPS Software/Virtual Push Button - located in router management page

PIN (Personal Identification Number) Method - located in router management page

Note: Refer to your wireless device documentation for details on the operation of WPS.

Recommended Hardware Push Button (PBC) Method

Note it is recommended that a wireless key (passphrase or password) is created before connecting clients using the PBC method. If no wireless key is defined when connecting via PBC, the router will automatically create an encryption key that is 64 characters long. This 64 character key will then have to be used if one has to connect computers to the router using the traditional connection method.

To add a wireless device to your network, simply push the WPS button on the wireless device you are connecting(consult client device User’s Guide for length of time), then push and hold the WPS button located on your router for 3 seconds and release it. A blue LED on your router WPS button will flash indicating that the WPS setup process has been activated on your router. (See “Product Hardware Features” on page 2)

For connecting additional WPS supported devices, repeat this process for each additional device.

TEW-731BR

PBC (Software/Virtual Push Button)

Wireless >WiFi Protected Setup

In addition to the hardware push button located physically on your router, the router management page also has push button which is a software or virtual push button you can click to activate WPS on your router.

1.Log into your router management page (see “Access your router management page” on page 27).

2.Click on Wireless, and click on WPS.

3.To add a wireless device to your network, simply the push the WPS button on the wireless device (consult wireless device’s User’s Guide for length of time), you are connecting, then in your router management page next to Push Button Configuration, click Start PBC.

4.You will receive a message counting down indicating the WPS process is activated on your router.

5.You will receive a success message indicate that the wireless device successfully connected using WPS.

© Copyright 2012 TRENDnet. All Rights Reserved.

16

Page 19
Image 19
TRENDnet TEW731BR manual Connect wireless devices using WPS, Recommended Hardware Push Button PBC Method