Plantronics 70N warranty Adjusting Fit, Multi-Shiftpairing

72536-05_CS70_US_12.06.qxd:05-PI-010 12/13/06 10:44 AM Page 10

ADJUSTING FIT

1 2 3

1.Slide the headset over and behind your ear.

2.Rotate and press gently towards your ear for a snug fit.

3.Rotate microphone until it is pointed towards your chin.

MULTI-SHIFT PAIRING

12

leEnab

isabD le

OR

OR

1.To pair another headset to the same base, you must first enable the multi-shift pairing feature. Long press (5 sec.) the speaking volume minor adjust up button on back of base until the power indicator light flashes.

2.Place a charged headset in charging cradle and red indicator light on base will flash for 2 seconds if the multi-shift pairing feature is enabled. Within 10 seconds of doing so, press either the "+" or "-" listening volume button for 3 seconds until the headset talk indicator lights to indicate pairing mode, and goes out after successful pairing. Repeat steps 1 and 2 if headset and base do not link when call control button is pressed.

NOTE: Only the last paired headset will work with the base. You must NOT be in talk mode (i.e. not on a call) when enabling or disabling this feature.

To disable the multi-shift pairing feature, long press (5 sec.) the speaking volume minor adjust down button until the power indicator light flashes.

10

11