Black Box Black Box network services, PSD-4 manual Technical Guide, Control Signals, Block Diagrams

Page 14

CHAPTER 5: Technical Guide

5. Technical Guide

5.1 Control Signals

MAIN CHANNEL CONTROL SIGNALS

RTS (DCD)

In RTS/DCD contention mode: follows RTS (DCD) of the selected sub-channels.

In Data Contention mode: ON if one of the sub-channels RTS (DCD) is ON.

CTS

On only when the CTS signals of all active sub-channels are ON. A sub-channel is active if it is connected to a modem and the DSR signal is ON (enables connection of dialup modems to the PSD).

DSR (DTR)

ON if one of the sub-channel’s DTR (DSR) is ON.

SUB-CHANNEL CONTROL SIGNALS

RTS (DCD)

• Follows the main channel RTS (DCD) (unless the sub-channel is disabled).

CTS

In RTS contention mode: selected sub-channel follows DTS signal of main channel.

In Data Contention mode: sub-channel receives CTS from main channel immediately after it raises RTS (unless the sub-channel is disabled).

DSR (DTR)

Follows the main channel DSR (DTR).

5.2 Block Diagrams

Figures 6 through 9 illustrate the flow of data and control signals in the PSD, in different DTE/DCE configurations:

 

Main

Sub-

Figure

Channel

Channel

Number

Configuration

Configuration

6

DTE

DCE

7

DTE

DTE

8

DCE

DCE

9

DCE

DTE

13

Image 14
Contents PSD-4 PSD-8 FCC Statement PSD-4 and PSD-8 Trademarks Specifications Highest PriorityIntroduction Choosing a Site InstallationConfiguring the PSD Printed Circuit Board Stap Identity PSD-4 and PSD-8 Installation System SynchronizationAC Power Troubleshooting Operation and TroubleshootingChanging Setting During Operation OperationBack panels of the PSD-4 top and the PSD-8 bottom Technical Guide Control SignalsBlock Diagrams Main Channel DTE with Sub-Channel DCE Main Channel DCE with Sub-Channel DCE Park Drive Lawrence, PA
Related manuals
Manual 2 pages 41.76 Kb