Black Box CATx DVI-D Extender with EDID specifications Wiring Information and Coding

Page 1

CATx DVI-D Extender with EDID

Figure 5. Remote unit rear view:

Power LED, CAT5 port.

4. Wiring Information and Coding

Table 2. RJ-45 pinning and color coding.

Black Box Tech Support: FREE! Live. 24/7. Tech support the way it should be.

Great tech support is just 30 seconds away at 724-746-5500 or blackbox.com.

ACS2001A-R3

CATx DVI-D Extender with EDID

Extends the video signal of a DVI-D device up to 164 feet (50 meters) over CATx cable.

Conductor

RJ-45 Pin

Color Code for

Identification

Assignment

Conductor

 

 

 

Pair 1

5/4

White-Blue/Blue

 

 

 

Pair 2

1/2

White-Orange/Orange

 

 

 

Pair 3

3/6

White-Green/Green

 

 

 

Pair 4

7/8

White-Brown/Brown

 

 

 

Customer

Support Information

Order toll-free in the U.S.: Call 877-877-BBOX

(outside U.S. call 1-724-746-5500)

FREE technical support

24 hours a day, 7 days a week: Call 724-746-5500 or

fax 724-746-0746

Mailing address: Black Box Corporation 1000 Park Drive Lawrence, PA 15055-1018

Web site: www.blackbox.com

E-mail: info@blackbox.com

1. Specifications

Cable Distance (Maximum) — 98.4 ft. (30 m) at 1920 x 1200 at 60 Hz;

164 ft. (50 m) at 1280 X 1024 at 60 Hz

Connectors — Input: Local unit: (1) DVI F; Remote unit: (1) RJ-45;

Output: Local unit: (1) RJ-45; Remote unit: (1) DVI F

Power — (2) DC 5-V 1-A adapters (included)

Figure 6. Jack positions.

© Copyright 2012. Black Box Corporation. All rights reserved.

Black Box and the Double Diamond logo are registered trademarks of

BBTechnologies, Inc. Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.

ACS2001A-R3, rev. 2

Size — 1.5”H x 2”W x 2.6”D (3.8 x 5.2 x 6.7 cm)

Weight — 0.3 lb. (0.1 kg)

ACS2001A-R3724-746-5500 blackbox.com

Page 5

724-746-5500 blackbox.com

Page 6

724-746-5500 blackbox.com

Image 1
Contents Specifications Wiring Information and CodingPower 2 DC 5-V 1-A adapters included RJ-45 pinning and color codingOverview InstallationConnect the local unit to the DVI source Turn on the PC