Specifications | Black Box PoE PSE Media Converter, LPS500A-MM-SC

PoE PSE Media Converters, 10/100/1000BASE-T to 1000BASE-SX/LX

1. Specifications

Data Transfer Rate: 1000 Mbps: 1,488,000 pps; 100 Mbps: 148,800 pps;

10 Mbps: 14,880 pps

Fiber Cable: 50/125, 62.5/125, or 100/140 µm multimode; 8.3/125, 8.7/125, 9/125, or 10/125 µm single-mode

Flow Control: IEEE 802.3x compliant for full-duplex; backpressure flow control for half-duplex

PSE Power Feeding Supports: “Endpoint” via twisted-pair Pins 1, 2, 3, 6

Standards: IEEE 802.3u 10BASE-T/100BASE-TX, 100BASE-FX; IEEE 802.3z/ab 1000BASE-T ; IEEE 802.3af Power over Ethernet

UTP Cable: CAT5 or better cable; up to 328 feet (100 m)

Indicators: FX: (2) LEDs: Power, Link/Act;

PSE-TP: (6) LEDs: PoE, SPD, Link/Act, 4W, 7W, 15.4 W

Power: 100–240 VAC, 50–60 Hz, 24 W

Temperature Tolerance: 32 to 122° F (0 to 50° C)

Humidity: 5 to 90%

Size: 1.6"H x 6.2"W x 5.3"D (4 x 15.8 x 13.3 cm)

NOTE: To connect this device to a router, bridge, or switch, refer to the corresponding device’s user’s manual.

Page 6