Building on your success | Xerox iGen4, iGen3 guide

Building on your success.

In the past, your success could be digital, or it could be litho. Going forward in challenging conditions, it will likely be both. Trends show that business is looking for a complement to traditional offset printing—a solution that matches your output to the right technology efﬁciently and cost effectively.

You’ll know that you’ve found success when your customers come to you every time— and you are able to meet all of their requirements quickly and easily.

Feeder module (up to six), two paper trays each; load while run; up to 30,000-sheet capacity

Largest digital cut-sheet format, up to 14.33" x 22.5" (364 x 572 mm)

Gripperless transport mechanism allows printing to within 1 mm of sheet edge; enhances feeding reliability across a range of coated and uncoated paper stock

Easy-to-load, high- capacity dry ink containers; replace while run

Single-point image transfer to paper with speeds up to 6,600 (110 prints per minute)

4/0 impressions per hour

Intelligent fusing adjusts for differences in stock; runs every sheet at rated speed

Stacker module (up to four); (2) wheeled carts per stacker; unload while run

	Top tray for interrupt jobs
	I
	Electronic collation with	Duty Cycle: 3.75 million
	offset stack delivery	per month
	J	Speed: 6,600 4/0 iph
	Optional document	Speed: 6,600 4/0 iph
	Optional document	(110 ppm)
	ﬁnishing interface
	enabling various inline
	ﬁnishing devices