Samsung HWF750ZA, HW F750 user manual Auto Sound Calibration

Page 12

connections

Attaching the Toroidal Ferrite Core to the Power Cord of the Subwoofer

Attaching the Toroidal ferrite core to the power cord of the subwoofer helps prevent RF interference from radio signals.

1.Pull the fixing tab of the Toroidal ferrite core to open it.

2.Make two loops around the core with the power cable of the subwoofer.

3.Attach the Toroidal ferrite core to the Subwoofer power cord as the figure

shows and press it until it clicks.

LOOPING THE POWER CABLE AROUND THE TOROIDAL CORE

Lift up to release the

Make two loops around the core

Close the lock.

lock and open the core.

with the power cable. (Start

 

 

winding 5-10cm (12.75 - 25.5

 

 

in.) away from the core).

 

Auto Sound Calibration

For your best sound experience, ASC provides re-positioning and calibrating Air Track and sound devices including the Sub Woofer, by automatically adjusting sound balance considering the distance between devices and frequency characteristics.

1. Place the ASC Microphone at the listening position.

• You should place the ASC Microphone at the actual listening location first, and then connect the ASC Microphone to the ASC IN jack on the Air Track for precise calibration

2.Connect the ASC Microphone into the ASC IN jack on the Air

track. The Calibration starts automatically and it may take about 2 minutes.

• If you turn off the Air Track or unplug the ASC microphone

 

before the completion message appears on the display,

ASC

calibration will be cancelled and incomplete. In such a case,

microphone

 

plug the ASC microphone into the ASC IN jack again.

 

When the Calibration completes, you can choose the ASC mode by pressing the Sound Effect button on the remote control.

During the ASC calibration, all other buttons do not work except the power button.

ASC will abort with error if you change the set’s position in the middle of ASC calibration.

12

Image 12
Contents Crystal Surround Air Track Thank you for purchasing this Samsung productFeatures HdmiSafety information Safety WarningsImportant Safety Instructions PrecaUtiOns Contents Getting started Before Reading the User’s ManualWHAT’s inclUDED Volume + Vacuum Tube AMP DescriptionsFront/bottom Panel ED scriptionRear Panel Remote control Tour of the Remote ControlEcontreorltm INSTAllING the WAll Mount Installation is completeConnections Connecting the WIrElESS SUBWOOFEr Calibration will be cancelled and incomplete. In such a case Auto Sound CalibrationConnecting an external device using Hdmi cable EnG ections conn Digital Devices Hdmi CableHdmi OUT Hdmi Hdmi OUT ARCAssembling the Cable clip Audio CableAUX OpticalWhat is Bluetooth? BT/TV/USB/HDMI/ARC/D.IN ModeFunctions To connect the Air Track to a Bluetooth device To disconnect the Bluetooth device from the Air Track To disconnect the Air Track from the Bluetooth deviceUSB Before you connect a USB deviceUsing the Repeat function Play/Pause/StopSkip Forward/Back Using the 3D Sound Plus function Using the Smart Volume functionUsing the Sound effect function Using the S/W Level functionUsing the Auto Power Link function Using the Audio Sync functionUsing the DRC function Using the VT Dimmer functionUsing the Anynet+HDMI-CEC function Using the TV functions with Samsung TVs onlyTroubleshooting Specifications Power supplyAppendix Warranty Limited Warranty to Original PurchaserQuestions or COMMENTS? AH68-02617A-00