Samsung HWF750ZA, HW F750 user manual Usb, Before you connect a USB device

functions

2.When you change the mode of the Air Track to TV, a message asking whether to proceed with Bluetooth pairing is displayed. "[Samsung] AirTrack" appears on the TV screen.

3.Select <Yes> on the TV screen. The pairing with the Air Track will be completed.

•Once the pairing is established, when you change the Air Track to the TV mode from other input modes, it will automatically connect to the TV.

•Changing the Air Track from TV mode to any other mode will cancel the SoundShare connection.

•If you want to cancel the existing pairing of the SAT to a TV and pair your SAT to a different TV.

-- Press the PLAY/PAUSE button on the SAT for 5 seconds in the TV input mode to cancel the existing pairing. You can now pair it to a different TV.

•In the SoundShare mode, you can control the volume and mute using either the TV remote or the SAT remote.

▪▪ TV SoundShare operation range

-- recommended pairing range: within 20 inches (within 50cm)

-- recommended operation range: within 16.25 ft. (5m)

▪▪ If the distance between the Air Track and Samsung TV is over 16.25 ft. (5m), the connection or the sound can be cut off. If this occurs, connect to the Bluetooth device again within the operational range.

▪▪ Make sure the Samsung TV's SoundShare mode is on before you use this function. ▪▪ The PLAY, NEXT, PREV, STOP buttons will not work in the SoundShare mode.

▪▪ Bluetooth Standby On function

-- Air Track will be powered on automatically when you turn the TV on if you connected TV and Air Track with SoundShare function.

-- You can toggle this fucntion On/Off by pressing SOURCE button over 5 seconds when AirTrack is powered off. If set to Off, the product turns off automatically when the TV turns off, but it does not turn on automatically.

▪▪ The SoundShare function is supported by some Samsung TVs released after 2013. Check whether your TV supports SoundShare before you begin. (For more information, refer to the user's guide of your

TV.)

USB

1. Connect the USB device to the USB port of the product.

2. Press the () button on the front panel of the Air Track repeatedly until USB appears.

3. USB appears on the display screen and then disappears.

•The Crystal Surround Air Track connection is complete.

•The SAT automatically turns off (Auto Power Off) if no USB device has been connected for more than 20 minutes.

▪▪ Playback will stop if you change the set’s position during playing files from USB device.

Before you connect a USB device

Be aware of the following:

•If the file name of a folder on a USB device exceeds 10 characters, it is not displayed on the OLED.

• This product may not be compatible with certain types of USB storage media.

• The Air Track supports the FAT16 and FAT32 file systems. -- The NTFS file system is not supported.

18